Im sorry but it sounds like it has been damaged. When I charge my battery, the voltage rises a lot after I plug it in.
thankyou for the clarification๐ rlly helped me a lot๐
This is normal, until you start to approach the end of charge.
A โCC/CVโ charge (aka - a lithium charger) starts in CC (Constant Current) mode which kicks up the voltage a lot [until desired current is achieved, printed on the charger], until voltage reaches a set level (usually 4.20V per cell) then it switches to Constant Voltage mode and holds there until current drops below some threshold
Is it normal for the TB vesc to beep when you are breaking?
which are the best hubs for 6x2 wheels of aliexpress?
Mbs knooby or chap 6x2 alibaba
Hey, Iโm running dual focbox with dual 6374 and a vtc6 10s4p battery (potential of 120amps continuous) with an 80amp continuous bms. Iโve heard that the bms cuts power at 120 amps.
What should I set the Absolute Max value in vesc settings if i will be running around 55amps battery max per focbox?
What BMS do you have. The bms is related to the battery. You could probably do 70amps and be fine
why not use ball bearings in the 8x28x9 superstars to put them on a longboard
Well on a regular cast truck the weight of the wheel would probably snap the axel
what a longboard truck would be ideal for that?
superstars your going to want trampa or msb trucks
I was thinking of machining my own trucks with a friend
you would need high grade aluminum like T6
What wheels are better mbs rockstar or trampa superstar
Both great.
Yeah if you want you can change it to 120 there are some really good videos on YouTube about configuring a vesc.
okay thanks, ill check them out