Hmmm interesting I’ll take a look at it!
@sharky read faq in the app. And yes as long as you have a can cable you just have to toggle can fwd to write to the other vesc
I think it might just be my phone losing connection with the unity’s Bluetooth module… my board has a carbon fibre skin and my enclosure is carbon fibre so it’s basically a faraday cage.
Download a bluetooth debugging app to your phone that shows the signal strength.
2 Likes
Ah I’m so stoked I got the app update and it is showing correct voltage and registers speed. I am not getting read outs on one of the motors (the one that makes more noise when hand spun) which leads me to believe I blew something out with my “rain skating tests”. Im gonna dive into the app again brb
2 Likes
Ok As a noob for the raptor 2.1 if I wanted a somewhat safe yet aggressive mode which is safe enough for say a 3 mile giggity goo (race) what would I set each of these at. Stock battery raptor 2.1 
I’m having a similar issue as @PickSix24 with Unity. I do get telemetry for a few secs but then it stops working. It’s not like the app freezes. The elapsed time keeps going. It’s more like the app cannot read more data from the Unity. Also, when I switch the Unity off, the app correctly reports that the connection has been lost. When I turn it on again, the app reconnects and can read the telemetry again, but only for a few secs.
4 Likes
Oh this totally describes my issue as well. I thought it was some time out thing that detected when the motors are spinning but the gps registers no movement. Basically I only notice it when bench testing. My phone goes in my bag when I ride. But during bench testing I get speed data from the unity for a couple minutes then nothing… if this is also happening when I ride it explains the weird max speed data.
3 Likes
Hmmm interesting thanks for the feedback I will look further into this issue (think I know why) and come up with a fix. 
4 Likes
Yeah as soon as it gets over just a few mph the signal is dropped. Then as soon as it goes back down Xmatic picks the Bluetooth signal back up again.
2 Likes
I sent a log if it helps
1 Like
Im thinking of using your app but i also use a firefly remote will it work? Because thay both have modes you can set
1 Like
Hello Which hardware do I need to get this app working with the VESC 4.12 https:///products/torque-esc-bldc-electronic-speed-controller? Where can I download the app? Thanks
It should I don’t see why not.
@noi you’ll need a Bluetooth module. Hm10, I have some for purchase if you’d like
Thanks, I just ordered a HM10 module. Looking forward to use your app. Cheers
@twan - Testing the new Metroboard X in Vancouver. I would like more info about using your app.
1 Like
Not sure what you mean. This thread has all the info you need.
1 Like
Hey, not a big deal but any chance we can get more board shapes 
I just want a cruiser/kicktail shape.
2 Likes
I have the same problem that telemetry stops updating using the unity esc. Normally it appears as the phone is just out of BT range. But it never regains telemetry. I have a few years experience as iOS dev. So if you need assistance just pm me
1 Like
If you give me a rough outline i can make one.
Regarding the unity freeze there should a tiny update to fix the dropouts