Its a teeny little bms that I picked up with a battery.
1 Like
Lol I’m over here trying to stuff a 12s5p in there…
1 Like
Perhaps with one old 4… vesc sideways??
1 Like
Focbox x2. But I have a separate heatsink cnc enclosur for them. Cut out will be all battery.
1 Like
Nice, what vesc are you using? I may have to change the place of some things, dc-dc converter can go to the rear cutout since I will top mount the trucks
I’m my current board I use 150mm of length to fit the VESC’s plus rest of eletronics
Focboxes. 
6 Likes
Are in the way of MORE batterys
2 Likes
I get the feeling you plan on routing a large hole on your deck for them batteries if you haven’t already done so 
Is that the pack you were talking about making?
1 Like
No, this is a hand me down. (And has stopped operating…)
1 Like
Thanks, it’s tight
Anyone knows if the 6,5” from trampa would fit on TB 218mm? Only half a inch more than the 6x2 people are running
Something like this?
8 Likes
Hey @Hummie thanks for the opportunity to get my hands on one of these ultimate decks. Could you please send mine to: Psycho Tiller, 24001 Quail Way, Lake Forest CA 92630 I paid $115 ….let me know if I owe more.
many thanks mars
3 Likes
Paid
Looking forward to get my hands on it
I just counted it off. 12s6p? Lol if you make a double/stagger stack box for this board I don’t see how I could refuse. I’ve got 2 decks, so one slim single, and one beefy crazy board sounds just right.
12s6p means 72 cells. 13s5p is 65 cells leaving room for bms and other junk, possibly 4x focbox…
1 Like
I’m really hoping @psychotiller decides to make a V3 of Psycho’s Arc wide enough for the new cutout and deep enough for stagger-stacked battery packs. I would buy one yesterday.
1 Like
@jboren He’s current v2 should still fit I believe. When I asked him he said the enclosure was a bit bigger than the last cutout already.
1 Like
Admittedly, my math skills are crap, but I think the new split cutout is 168 mm wide, and V2 arc is only 165MM. The single cutout version should work, you’re right. Cutout is 13 deep and The Arc is about 15mm deep so 28mm of depth, and I measure 35mm for stagger-stacked raw cells, before the pack is wrapped.
Still be nice to have a stagger or double-stack deep enclosure but may not be enough demand to make it worth making a new mold, I have no idea. I’d buy 1. Actually, I usually f-up the first one of anything so maybe I’d buy 2. 
Disclaimer: the math here could be completely wrong or possibly right.
2 Likes
V2 is already wide enough for a larger cutout. The dimensions I list on the site are of the battery area of the enclosure. Look how much wider the flange makes it.
5 Likes
My current pack won’t fit, guess I’ll have to make a new one 
2 Likes