Thanks a lot, really liked your solution
I’m thinking in doing it so that if the connection is restored the throttle has to be kept neutral for a given time until it is resumed
1 Like
Thats how I do it on the “soft” mode… its more complex, but that’s the main idea.
My first version was the same like yours. But it sucks when u are just a few meters away from the board and the board goes into estop, u have to switch on off again… Blabla… sucks.
1 Like
The worst I how mine is currently
It just goes to neutral until the board is reset, I only lóst connection once, but it was scary since I forgot I had it setup that way, almost run over two old dudes
I can’t understand why there aren’t any features like this in the remote section. Show me the result if u are done… would be nice to see a different version how to handle it…
1 Like
Will do, there is a lot of other things I have to code first
1 Like
So boysch! little update!
the PCB with receiver and step-down form 42V to 12V for headlights and adaptive break lights is finished. Had a little trouble to find all the components, but now its working great. Check out the short demonstration video!
Of course adjustable from the settings menu… always on, with headlights or off.
19 Likes
Looking awesome!
1 Like
Man this keeps looking better and better! Great work! 
2 Likes
Can I get in on the wait list on this? I so need this.
Loving you work looking so awsome. hoping there will be pre orders soon 
Hey guys, I did a lot of testing the last days. And I am happy with the results! The Remote is ready for the first orders!
I want one please fill out the order file. I ll start building after I received the payment.
-
FeatherRemote Advanced Get the full package, with remote and advanced receiver assembled and ready to start! The advanced features include a receiver PCB with 10s to 12V step down (3A) to use simple and small motorbike breaklights and headlights. Adaptive break light support.
-
FeatherRemote Basic Get the full package with remote and basic receiver assembled. Includes 5pin JST connector to simply connect the receiver to the VESC/FOCBOX.
-
FeatherRemote DIY Get two PCBs with mounted and precoded Ardunios/FeathersM0 combinations to print or create your own FeatherRemote as u like.
FeatherRemote advanced (FeatherRemote, FeatherReceiver Advanced) 160€ FeatherRemote basic (FeatherRemote. FeatherReceiver Basic) 130€ FeatherRemote DIY (Adafruit Feather precoded with PCB for remote and receiver all other parts must be provided by your own!) 80€
I ll accept 10 orders for the first batch and will support each order on setup ect. For more questions just sent me a message!
7 Likes
Can the throttle be reversed, so away-from-body is brake and towards-body is throttle?
Those of us using trigger remotes can’t really even try things like this without that feature
It’d be like borrowing your spouse’s car except the throttle and brake pedals are on opposite sides from yours … then a car pulls out in front of you … and you instinctively mash the throttle… despite being in full control the entire time up to that point when your reflexes activated
6 Likes
Theres no good reason, why these parts can’t be built into a 3d printed trigger style remote. Someone just needs to model it.
4 Likes
Do it
10char
1 Like
Yeah… Trigger style would be so nice 
much more control on a MTB
1 Like
If someone made one. i ll create a PCB for it!
1 Like
I think you just need to flip the wheelknob magnets. Tath way you would reverse the hall-effect
1 Like
Short update! I started to assemble the first batch!
4 Likes
How do I know I am one of the first 10?
1 Like
U are in the first 10! Payment done? I am currently at 8 orders.