They work on TB218 (looking if fits 6355 on e-caliber)
I like the thinness of this drive! Will torque/gear wearing be an issue as they are 10mm? Let’s say if i were to use one of these for a single drive.
Shouldn’t be I just updated as in reality Mini gear width is 14mm. So 4mm less will not have much different Also don’t forget this is on urethane in worst case you will slide which will reduce stress on teeth compared to pneumatics.
Also on the side it should be even more silent compared to mini as contact area minimizes so I wouldn’t be surprised that it will be the same noise as belt drive
so is this a black friday only price? if so how much would this be in the future.
Edit: also were you able to check if these would fit on e-calibers?
No we will only begin taking pre-orders To see if anybody is even interested to buy it
waiting for this
I think he siad they will fit but only 6365’s
interested as well
6355 on e-caliber maybe big maybe
Is this the same one you were offering fur 400 euro?
A smaller version of our urethane gear drive for urethane wheels.
The difference from FatBoy Mini Urethane:
Nano Mini Gear width 10mm 14mm Cover Plastic Aluminium Hangers Compatible TB218, FatBoy 230/240 FatBoy 230/240 Gear Ratios Fixed 1:2.6 1:2.4, 1:2.6, 1:2.8 Motors 6355, 6374 6355, 6374, 6380 (on 240) Motor Axle 8mm 8mm Motor Axle Length 15mm 20mm Recommended Wheels ABEC 107mm, Kegel 110 ABEC 107mm, Kegel 110
they are thinner, so quieter he said. the 400 Euro Groupbuy is for the mini.
Mini includes FB 240mm Nano does not
Kinda the same, it has static one gear ratio option, is narrower, plastic cover (same ass FatBoy SS) not aluminium, doesn’t come with hanger
@ethel Mini includes FB230 or FB240
First pieces of prototype
Kinda the same, it has static one gear ratio option, is narrower, plastic cover (same ass FatBoy SS) not aluminium, doesn’t come with hanger
I’m interested, I’d also need a 36T Kegel pulley pair, let me know.
I’m interested, I’d also need a 36T Kegel pulley pair, let me know.
Nano drive will be on pre-order, pulleys can either be shipped with drive or separately if separately two different orders
Is this a tb 218 hanger or the Fatboy hanger?
So i have some good news and bad news…
Good news is that the drive will fit e-caliber hanger with 6355 motors (on non angled decks like evo or will need to tighten down as it can touch the hub because drive lift ups on evo my -5º degrees)
Bad news because of 2mm difference between TB218 and Caliber hanger profile it will be two options when buying TB218 bigger one and E-Caliber:
Caliber: 16.6 mm x 18.2 mm TB218 18.4 mm x 20.4 mm
You can use e-caliber one on TB218 but will need to sand down 1mm on each side
So here are first prototype part fittings.
TB218:
E-Caliber (Used normal hanger)
Baseplate with mounting hubs
Wheel gear
TB218
10char