Diyeboard.com : China Factory Direct Retail - Electric Skateboard DIY Kits and Parts

LG18650MF1 is middle power cell. It is widely used in electric vehicles, electric bikes etc. Also it is economic in cost. 30Q is good but expensive, it have to config with better esc and motor so can perform its best power.

in general, mf1 suit our esc and motors best, though 30q can improve the performance buy not much, during the speeding up and climbing 30q is much better. battery package serial and parrallel and cells all affect the discharge, but higher discharge is kind of waste on current escs, we are now working on upgraded esc with higher speed range thus require more powerful motors with suitable kv and with stronger battery supply, in this case 30q in 10s5p will be awesome.

2 Likes

Thanks for clearing that up :slight_smile:

3 Likes

video updated, check it.

1 Like

Sweet video! Well done.

http://www.diyeboard.com/9-305mm-all-terrian-truck-kit-for-our-6-at-wheels-p-632.html

http://www.diyeboard.com/4wd-esc-using-dual-esc-x-2-speed-control-kit-for-four-motors-p-633.html 4WD ESC using dual ESC x 2 Speed Control Kit for DIY Electric Skateboard with Four HUB Motors or Four Brushless Belt Motors

This ESC Kit comes with 1 REMOTE paired to 2 Dual ESC Kit that drive 4 HUB Motors or 4 Brushless Belt Motors This 4WD ESC kit is for four motors with FOC Sinusoidal wave firmware prebuilt in the esc pcbs. High quality electronics, durable and reliable. Components Included: (2) ESC for Dual HUB Motors / Brushless Belt Motors Speed Control (1) 2.4G Remote Controller Best Recommended Setup 10S3P - 10S5P 18650 Lithium battery pack

3 Likes

Well done: it seems can fly on a plane too, not bad. Just wheels are too small, at least 83 mm would improve the ride quality.

what kind of top speeds did you get out of that Dual ESC setup?

Here is a review of the 10s2p dual belt kit that i just posted :slight_smile:

3 Likes

@diyeboard do you have any discounts if i wanted to buy your 10s5p dual hub esc and battery? Also what is the max amperage and watts it can handle?

you are right, we will use replaceble 83mm hubs for this swappable battery kit, can be better riding performance.

1 Like

it depend on your motors and your battery, it can reach 43km/h for four hubs and 46km/h for four Belt motors.

1 Like

we already chat online on our site, thanks for your interest.

1 Like

Will v1.1dual drive escs work with 8s3p?

you need to order 7s of 29.4v cersion of this esc, it can work then. we have 6s, 7s,10s three voltage versions for esc. and customers can change voltage on our esc pcb by making some soldering change.

1 Like

http://www.diyeboard.com/36-dual-motor-6-wheels-allterrian-electric-skateboard-10s2p-p-565.html

1 Like

THIS BOARD IS on sale now before Chrismas, can be updated to 10s5p LG or Samsung battery. http://www.diyeboard.com/36-dual-motor-6-wheels-allterrian-electric-skateboard-10s5p-p-596.html can change to use this deck: http://www.diyeboard.com/38″-longboard-deck-loaded-vanguard-clone-bamboo-and-fiber-deck-p-581.html

Just for clarification , there will be a 10s Swappable enclosure and a new ESC that we can adjust breaking via an app?