Do you have telemetry turned on in the Unity?
If that were only the case. I love the way you think though. It’s how it should be.
Well I turned on UART and set baud rate to 9600.is there something more to do?
Are you using the latest version of the phone app? What symptoms are you seeing?
App version V1.121. I see the bluetooth. I can connect to it through the app but I don’t get any real data.
Money from sold Metr Pro modules goes to me and @hexakopter. Expensive or not, this is of course very individual and everyone will have different opinions.
When we released Metr Pro, it was working with VESC Monitor. You can find a post somewhere and APK / version number that works. Some time later it stopped working. I guess there is some problem somewhere, with so many different modules this app supports it is hard to come up with the code that works for all of them. We are obviously willing to help. We can send a Metr Pro for free. We can also help fund the investigation, maybe something else, I don’t know. We beleive there are enough people on this forum that can benefit having both Metr Pro and VESC Monitor working together and we want those people to be happy 
9 Likes
That’s a great talking. You module and app are really nice and people know it, don’t worry 
To be honest I only used VESC monitor app so far. It’s just now that I can not get it working with the unity but I will figure it out why.
So got the module connected to an unity to work. Or well it works 1 time out of 4 and not sure eit is fast enough to get the real time data as before. For sure there is some conparibility problem.
Plus most of the time I get the temperature with a red highlighted bar.
It seems the app detects KV alright, because max speed to 60k ERPM is as expected.
But when setting 1 to 1 gearing, 110mm wheels and 75KV motors, it says I should be reaching 90-110mph, when it’s only realistically 30 at full throttle… Does the speed calculation take into account motor KV? Am I missing a setting I need to change to get accurate speed readings?
max speed in the mode box only says which speed can be achieved with the max erpm setting. And when you disable max erpm it will set it automatically to 200000 erpm which results in that high speed.
I should only be able to reach 33 mph on my setup according to other calculators.
Are you sure motor magnets and wheels diameter is set correctly?
1 Like
Magnets probably not.
I don’t want to disassemble to see, maybe I’ll just lower the number until the speed makes sense to get it right
As i said it is a theoretical software limit which shouldn’t be reached. Just ignore it, it doesn’t matter.
1 Like
Well you can ride and adjust the motor magnets to match the GPS speed. Which motors do yuu have?
Try magnets = 28
That worked! How did you figure that out?
Adjusting motor magnets up and down caused the speed to vary up and down wildly… 28 magnets worked, accurate speed now. TB Direct Drives for a little while.
Yeh standard outrunners are 14, hub motors and direct drive are usually 20 or 28. Ah you have the TB direct drive, interesting!
1 Like