Does anyone have a good photo or drawing of where the balance leads go on the pack. I’m starting a build soon and that’s the only thing I’m unclear on. Thanks !!
12gauge wire to make the flexible series connections but when you put two parallel groups in series you’re using nickel. What thickness nickel on those connections? Thanks
0.2mm x 10mm single in positions 2, 4, 6, 8 and 10 and double in positions 1,3,5,7,9 and 11 with 4mm2 tinned flat copper braided wire for main series outer connections.
I’ve been riding my board for so long at so much current, I never had issues with batteries disbalancing or a bottleneck on power, I know the P-Groups connections carry a lot more current, that’s why I use silicone wire there
Hey, I’m going to try tack up my own pack too, would you sell me the “specific 11 pin connector” for the BMS you refer to please and thank you?
I’m in New Zealand, one of your colonies on the opposite side of the planet
Cheers, Owen
Hey guys, I’m about to follow this extremely useful guide to do my own pack, but a lot of the images are missing. Any chance of relinking them up?
What nickel strip thickness do you recommend, and what AWG rating for the link between each 4p?
Thanks very much, really looking forward to GT’ing my way to work without having to fumbling the mode back out of ECO every time I slow down. Tedious!!!