Night glow sounds nice, ghostrider style (-; yeah maybe they are not the cheapest seller for resin, thats true.
So no fire works yet?
Amazing builds …thank you for sharing. Looking forward to seeing more.
No Firework yet. Only a bigger ignition Spark (-; But dont forget that the un moddet Roxxy performed well for several weeks until they explode. So it took some time to say that the Capbank will improove them !
Thank you mate. Will keep this thread updated !
1 Like
news about the Roxxys? Still going well or did you switch to a new setup?
Still running them… seems that the CAPS making the roxxys safe for mine. No new Fireworks (-:
Set up a second pair of Roxxys for another Build…
Still the best ESC for my purpose, not perfect but damn powerfull !
3 Likes
I´m thinking about using the Hobbywing Ezrun 6 for 2 Trampa builds. Seems like they work well without modification.
They are really unkillable and good value, even if they are quite expensive.
1 Like
Yeah the MAX6 are BULLETPROOF without ANY mods No probs with heat and moisture No with vibrations and dirt No with high current or “over current” Just have Fun and dont worry about.
Hobbywing should make some CAR ESC for 12S 
I think the price is fair for what you get.
1 Like
Good to hear that the caps are doing the job👍🏻 I’ve eventually got my build progressing which the MGM controllers, their building them to custom specs as we speak. I got a email two days ago showing the custom cap packs that they’ve completed. Controller specs are 2-14s 100 amps continuous 140amps for 10 seconds 180amps for 3 seconds Has cost me 1800 euro so I hope it works😬
2 Likes
Hey Mate,
nice to hear that you start the deal with MGM I really really really hope that your massive investment will turns out good for you. I told you about my expierences with MGM in RC applications some years ago, so i hope the best.
Have you pictures from the ESC itself? This Capbank is for both ESC or you got 2 Capbanks? Massive 7500uF you got with one! Compared to YGE 9-Caps each 390 = 3500uF
Specs dont sound that much better as from the Roxxy i think. 12S-120A
Of course 14S is better but most motors have a 10 some 12S limit, which motors you choosen?
When did you get the MGM´s ?
Cheers Jenso
Hey Jenso👍🏻there is two capacitor banks of 5, the caps are pretty big 16 diameter, 35 high. I could of gone for a larger esc but the physical size would of Been to large to fit on the back of the board with a bigger cap packs + the reciever and Bec. The motors are enertion 6374 that I’m making longer shafts for so I can run a bearing support. Batterys are 4 6s Turnigy graphene 6000mah, connected in series and parallel. I don’t have photos of the esc’s that there making yet but they will look something like the following pic. The controllers have pretty advance configurations and adjustability with real time data logging comparable with vesc. Hope they work, I’ve been told to run them at 6s to start off with then check the data feedback and send the results to MGM and they will give me a starting point for 12s. After sending a link to your fireworks vid they are saying that your problem would be
caused by constantly overloading the controllers when you get off and on the throttle causing peek burst current to often in a short period of time… who knows really but I’m going to ride mine like it’s stolen, 2 years warranty so so I’ll put that to the test.
2 Likes
Hey Jenso
Making my first post and I’m almost done with my build, thanks to your help. I have 2x sk3 Turnigy 6374 192kv, should I go for the 9100-12 or the 9120-12 Roxxy?
Cheers
Go for the 9120-OPTO, dont cost that much more… make sure you get some additional CAPS … like the YGE 9 Caps Cheers
Hey Jenso!
Do you recommend the Roxxy with cap bank as a good upgrade from the Max6 ESC?
Is there a big increase in power from 8s 150A to 10s/12s 100A?
Thanks!
I think its alot more powerfull… But the brakes can be hard to get on with… like i mentioned from DAY1 with the Roxxys the Brake way is so short that you really need sensitive fingers
Cheers Jenso
Does it worth having 120A continuous (9120-OPTO) more than 100A continuous (9100-OPTO) if the SK3 brushless motor is rated 70A max?
I’m thinking of buying one of these ROXXY ESC too.
I never thought about the smaller ones… this 20€ less dont seems interresting for me… Some people i know are ok with the Roxxy, other dont… Its a beast but power/brakes are hard to control
Hi. Could you, please, tell me what are your cap bank specs? 
is it 63V 3600f?