i have changed my mind on the gear drive… someone brought up a valid point on the belt being a purposeful weak point and being an easier more cost effective replacement vs breaking a gear
So I finally separated this damn stator from the housing… I separated all the phase wires and now I just need to find a can w/mags since the can for this motor was dented and broke (why I took the stator off)
As to the whole reason why, I’m building my 12v delta/WYE switch I mentioned a while back. More 1 motor u would need 2 of the relays in parallel shown in the pic since they are only rated for 40A
Really small package for a delta WYE switch, and the buck converter is to get a constant 12v for the relay
Gearing up to Mod1.5 for the Redmond, Wa 8 mile race on July 14. Will be the fastest avg speed race course to date. Should make things interesting.
Took the prototype STREET wheel on it’s first run. 19.6 watt hr per mile avg on a 56mph setup as per data logger. Will charge battery and see if Ah matches up tomorrow and retest. The other set is being tested by a reputable rider. Report is he picked up 5-8mph over the Race wheel and same range as the AT tires. Grip and ride quality better than AT. 70a STREET wheel is looks promising. httpsww.instagram.com/p/BkeThMTgNMA/?utm_source=ig_share_sheet&igshid=vvmj6n4l4yy5.
Haha I remember that ride. @MoeStooge was the guy that got taken out by a napkin now he’s the guy that’s breaking speed records
Hahah … one and only hahha
what board was that with the green hubs with the crazy trucks?
Esk8 insanity
I think i had the balls to take it to 3mph before i bailed
It was destiny. Shit was seared into my memory. Lol I’ll never forget it lol
60plus mph @MoeStooge is ok…10mph he’s like a baby giraffe lol
Hey @MoeStooge … If you are wearing an esk8 race cam this weekend …Just film what’s behind you. Lol
Good luck!
From one of casualties “ @MoeStooge was way too fast…”
Lol couldn’t say I didn’t warn them lol
… >_> What…
Man I need some details…I wanna see how ugly it was!