Next time try…
Your killing me smalls
Thanks you so much for all your help and support. This remote is the best I’ve ever seen. Feels solid and looks so sex man. The led lights add another level of safety along with the estop feature. I love it!!!
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-2/88821/228?u=b264
@topcloud Is that the Charger? I fully approve of this, but you may need to tighten the belt a tad
the very one yet my ultimate plan was foiled, however, when I discovered Stooge Street Wheels are not sympatico with the Haggy Kahua step-down axle.
Incredibly, the Bergmeister wheels do not bite the 121cboards Aileron deck (my foot is another story) .
Edit; I will manage the risk and install a front freebord s2 on it; the ability to always-ollie sounds useful and fun on pneumatics and this Aileron does have a little flex in it.
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-2/88821/229?u=b264
@louwii If it’s not that hard, how much will you sell them for? Do 100 and sell me five of them. They won’t last a week
Last I checked, all the vendors were sold-out
I didn’t even think selling some. I mean, I’m pretty sure you can buy cheap ones that are working with Android 8 right? I just did it because I have the hardware and I was curious. And I had a spare HM10 lying around.
I’ve ordered a bunch of them and they are hit-and-miss. I don’t feel like FOCing with them. I’d rather buy them already working. I know a lot of other folks would too. @psychotiller and @JLabs sold them but last I checked they were out of stock.
Ahh it looks like 'tiller has them in stock again and bkb has them again as well
This is genius. This is going to be such a fun board to ride!
nice jig
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-2/88821/233?u=moon
thanks. definitely made things easier.
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-2/88821/234
wow, Thats going to be a tight fit on a trampa.
Yeah very tight.
Lenght of that box is 220mm, width of the board is 220mm, max print area of my printer is 220x220…
Cells + fiberglass separators will take 200mm which leaves me with 10mm each side for mounting holes.
Havent’t even checked if I will be able to fit unity + diebiems on the remaining space >.<
We have a very similar build. Are you building that to make a 12s7p?
Mine should look like this when finished, what is your layout? Surely you’ll make the pack flexible…?
I just want to see other ways of doing it
Yeah it’s 12S7P, and layout, well it pretty much shows it on the picture.
Looks good is that a vinyl graphic you laid on there
Yup!
Looks really sick in person. A lot of depth
I don’t know what you mean with hit or miss. I flashed like 20 of them and they all work. I have been using the same 2 across different vesc at 10s and 12s. To be honest I didn’t know they could even fail due to the flashing.
“Hit or miss” means they either do or don’t work out of the box. I’ve never flashed any and want to buy them already flashed.