Just printed a blue SPARKLE to match my upcoming “blue” prototype on steroids !
Quick reminder the post link is on post 178
Do you have more info on how to wire the resistors to the steering channel and also what type of resistor
1 Like
thanks ! is there possibility for me to take ownership of this thread (in terms of posts?), So I can update the first post accordingly with all the good info; or if any mod could do this - that would be awesome 
The resistor can be any type (Preferably as small as you’re comfortable working with). Just make sure they generally around the same value (E.g 10K Ω and 8K Ω should work fine) and wire them like so:
1 Like
Hey folks, I’m receiving really great feedback on the remote either on forums or in real life. That’s why I decided to investigate a bit further for those who don’t want to print it or have trouble in reaching an appropriate “professional” quality level. This is now in milled in ABS block; professional quality; oil finish black painting (colors are possible). That’s a prototype and I used all the donation (plus added (a lot) of extra money) as you can imagine this costs $$$ for 1 piece 
The fit is perfect as you can imagine.
My wife is gonna killed me hehe!
EDITED remark : I’m not here to make money with this remote. The files are available if you want to print them for yourself and personal use.
is there any interest
10 Likes
That’s sick quality!
For the Mad Monkey mod they made a mold to be able to cast the enclose with resin. Might be a cheaper way to produce them than milling from abs?
1 Like
Wow, that is just downright beautiful…
1 Like
I ended up damaging the usb board while soldering so I purchased a universal usb board. Could someone please help me out with identifying what the three pin-outs on the the main circuit board are? The new micro usb board has VCC, D-, D+, ID, and GND. I know I will need power and ground from the main board, but what will the third wire go to?
“ID” most likely isn’t used. Also, you should try first with only the + and - rails connected. There’s a good chance the charging circuitry doesn’t use the others, and this way you’d save some mess inside the case.
According the the badwolf tutorial, you will need to use the white wire even though you shouldn’t need to. Apparently the battery will not charge if the white wire isnt attached to the PCB from the usb board.
I’ve got a MicroSwiss hotend coming in the mail. Super excited to print some of these and I’ll send some $$$ your way once I do. Should get some great quality as well. That milled ABS one looks super sweet, but must be quite expensive. I like the mould and cast idea from @mptrs
do you have some updates about this?
for sure, I got the ABS enclosure on my desk for 2 weeks now
cool, but I just checked your shop and I can´t buy it nowhere
I can organize a group buy if some people are interested to lower the cost at the maximum. We would need to arrive around 20/30pcs to get something decent (I think!).
Hey guys, someone is violating the license by selling the SPARKLE. He removed the logo and violates the CC license.
let’s take this guy down - thanks for your support folks!
whois on the domain gives
Domain name: 3dguy.co.uk
Registrant: adam downes
Registrant type: UK Individual
I sent him a gentle email so he can remove the item, let’s see how this goes 
4 Likes
@unik: I put on my Sherlock hat and give you the following…
It’s @qtron who’s selling them.
Check this post:
and compare with this:
4 Likes