you guys all gush on equipment, dude you actually indicated with your arms, showed respect to other road users. helmet shows respect to you. indicating your intention shows respect to other people on the road… for me in my community this goes a long way.
4 Likes
Gotta tell people I’m here and flail my arms and my ass so they see me. But I follow all the same laws of bicycling. No one ever questions or tries to run me over because I make myself seen. We all gotta use the road, so just pays to be conscious of everyone using it.
3 Likes
I’m a big fan of arm flailing as well. Don’t have blinkers so we can’t leave a car driver to guess what we are doing.
2 Likes
from where did you get the antispark and the plug?
looking for exact this what you’ve used.
1 Like
As @mmaner said it’s the AS150 in that link
The side inside the enclosure(male with anti spark resistor) was soldered to the wire then screwed into the plastic housings as normal, then a hole drilled in the enclosure, the wire soldered to the battery and the housing glued to the enclosure.
The female side, was screwed into the plastic housing, a hold drilled in the side for the soldering opening. And the wire insert was through the solder opening, and performed the solder from the back end of the connector with it screwed in to make the 90°. The back of the connector was then filled with liquid electrical tape. Another hole in the enclosure passes the wire back in and around to the positive side of the focboxes. I know it might seem wrong that the black wire goes to positive…and I didn’t use the red housing…but yea… aesthetics. Lol.
5 Likes
So…
Just realized i left the board plugged in for 3 days after coming home from that video. Lol was too excited to share to unplug my board
Still 49.8v 
1 Like
Isn’t that how you balance the cells? I never unplug mine until I ride them
Plugged into the wall, yes that’s how you balance the cells.
I meant I left the loop key plugged in… board on and ready to ride in my garage while not plugged into the charger.
2 Likes
Just another advantage of a huge mother f*ing battery
6 Likes
There are a quite a few happy evo riders. I’m 1 also!
3 Likes
reporting in, this deck is fucking awesome for higher speeds. you’ll need wedged risers though!
especially with the enclosure from ben!
4 Likes
i had a great deal got it for 115€
1 Like
Evo is easily one of my favorite Analog and Esk8 decks.
It’s like the bee’s knees of everything.
its sold out. i asked the guys in the shop if they would sell me the deck only without trucks and wheels.
Fyi so everyone knows…
The Falcon Evo 36 is out 
5 Likes
I think streetwing may be looking at getting hold of some of the landyachtz decks now that the new ones have been released. @DavidBanner?
1 Like
I don’t use wedge risers and Im using the enclosure from @bigben. What makes you thin you need wedges?
1 Like
Yep, no wedges for me either. Just 12mm risers.
1 Like
I was thinking it but not saying it. The Evo is already wedged