Where did you get the soldering paste?
you can also bend the pack at the top so instead of having the two smaller disconnected packs side-by-side that you need to resolder you can have them head-to-head and keep the connection intact. You have to insulate the heads so they don’t short against each other and then reshrink wrap. End up with a long pack that the wires come out the center
2 Likes
I bought it off amazon or eBay nothing fancy just do a search
Aluminum Solder Wire 96 Sn/4 Ag .062 Flux Core https://www.amazon.com/dp/B00DC3102Y/ref=cm_sw_r_cp_awd_stiaxbXZMH703
Found this aluminum solder and tried it out it worked exactly 30 million times better than that old stuff I used
If you didn’t add to this thread…I wouldn’t of known you put it up…I was just gonna ask you what you did… 
Omg how long did that take? I didn’t even want to try that I felt like it’d take so long
Also did you take pictures of the connections? I’d like to see it if you don’t mind
1 Like
Yea it’s really easy I just split one connection but lowguido spilt it multiple times. Do whatever your setup requires! I have 3 batteries that I need to split I’m gonna try to do what he did I’ll update this thread with results
1 Like
Ever work with these?
What’s the C rating on that?
That is an excellent question
It has a board on it which you’d have to take off for over charging and what not.
You’re better off just buying ready made lipos and dissecting them. I reccomend 8000 mah 6s zippy battery or 10000 mah 6s floureon lipo battery.
Honestly multistar sucks in my personal opinion
1 Like
it says its for phones and ipads so i would say 1c max
It didnt take me too long. A few hours max. I did 2 of them. Maybe one day I will have the means to make a video how I did it.
For what it is worth, it is a lot cheaper to buy a pack and separate them than it is to buy individual cells.
Lol I just did a pack like that! I was so inspired that after work I took 30 minutes and soldered it up. I didn’t attach balance leads or terminals. I have a lot of cells laying around and this is perfect.
The solder is key.
3 Likes
Yeah! join the Low Guido flat lipo revolution!
5 Likes
Viva La Revolution —
And you would think they would make them like that already…
Can we get a petition going? Lol
It really is a revolution !!!thanks buddy