Man i really wanna thank you guys for all the input, kind words, support.
I feel the love and it feels good (-;
The spririt of DIY, this we make parts better and trail an error, the exchange of knowledge, sharing the passion, spreading the word… really love it… happy to be back
For the Matrix2, i think before machining modded parts for it, we all really have to find the weakspots… know what i mean… my matrixx2 is 2 years old, not that much ridden but there is no oval bushing or anything… lets use it first, find weakspots, then we will find solutions for IT
what you think?
Complete own Hanger / Truck … yeah nice for sure… i think as an OPTIONAL add on for people which can afford a custom milled precision truck super nice… but we need for sure a stock truck(maybe with improoved parts) for the most people… eATB builds will kill your wallets hardly and not everybody needs a milled Truck
But i want both, stock Trucks, and crazy custom Modell
Sexy shit, smooth roundet, could be used also for other applications
Finest 7075 Aluminium, Hard anadozised
Full adjustable like original with M8 screw from Top
Industrial Elastomer Element with 70A Shore
Prototype Batch of 5 complete Kits
Beta Batch Price 100€ all Parts includet
Direct Replacement with original
See here a short comparsion on the bench from Duffman Spring VS Elastomere :
I’m still running without dampas as I find them too stiff. The problem with only springs is I find them to, errrr, springy. They kind of bounce a bit when you lean hard.
Legend. Any words on turning radius compared to the softest trampa dampa? Maybe @Duffman can comment on that.
Issue I had with the softest dampers is that during the first couple of rides, the stiffness was OK for high speeds but the turning radius suffered. Now, they have softened considerably and the turning radius is ok, but the stability at higher speeds has suffered. The riding characteristics are completely different as opposed to a fresh install (sucks).
Springs only has been terrible for me. Needed a shitload of pressure on my rear trucks to keep the board stable.
I switched to blue in the rear and red in the front and added half bindings, now I can run stable at 60km/h if I need sharp turn jump with the board and it works
I can’t say much about the comparison to the Trampa spring/dampa combination because I run these on my MBS monster board. But on this one they were a huge improvement. A friend switched the springs/dampas of a nexxt truck to elastomers an is totally satisfied, he won’t never go back. We are running these for over 2 years now and they show no sign of wear.
The main problem with spring/dampa combinations in trucks is, that the force increase over the tilting angle is very progressive. Unless you haven’t a lot of preload on them, you have not much damping ‘in the middle’ when you are running high speeds. When turning the force you need to tilt the board increases very fast, which can make it difficult to turn on low speeds and/or without bindings.
When you are running soft dampas and highly preloaded springs, it can happen in sharp turns that the spring blocks and prevents any more turning and lets you trip over.
Elastomer springs have a low progression, and a big inherent damping factor (low rebound) which dampens speed wobbles before they occur. They also can not block, what prevents you from loosing balance in very sharp turns.
I’ll report back the difference, I’m running yellow dampas right now.
Wow never thought about that but I guess this is exactly one of my problems after over 1000km of squeezing the dampas. Since some time the steering feels “loose”. Today I focused on the trucks/steering and recognized that they are very unstable and spongy at higher speeds especially on concrete Furthermore I had 2 speed wobbles at 40-45km/h which never happened before except when riding without dampas. Also it feels like the hangers swing from left to right at higher speeds, like a spring
Hehe @nw-esk8
yeah i know you are with the 1:5 helicals, i guess its the 4-5 Batch now (-;
interrested still day one Dude i know expensive shit
so let me tell you guys its not just words … here we go with first impressions of our MBS Matrix2 Spur Gear Drive AKA E-Toxx Mini Direct Drive :
(pics are with straight gears / helicals works the same)
E-Toxx AS5047 Encoder Lids
integrated mounting solution for Magnetic Encoder System
sexy 3D design with functional metal inlays
ONE Hub Adapter for MBS Rockstar-2/FiveStar/Rockstar Pro
Oh sh!t thats ultra clean, the E-Toxx logo looks like dat Gucci shizzle to me … mind blown
ide put myself up for testing but im in a long queue for Escapes…
I’d love to Beta-Test.
But…guess what…
Ripped all my shoulder ligaments (Rockwood4/Tossy3).
Sure,… it happened, riding my E-Toxx Direct Drive Board to my work-place in the woods
Means no riding for at least half a year from now on.
It’s a while ago allready,…i thought i have to overthink this kind of Transportation-method.
But… i’m totally sure i will start again after healing my shoulder.
How is it called ? “geteiltes Leid” Jenso ? i feel with you … ouch
Thanks Dude, what should i say … @Duffman is a fkn genious with 3D Design and many more
BTW
Did you tested the new Flipsky “6”?
THX, send ya an PM
Oh Nooooo Brother
What the hell, FUCK.
Yeah " geteiltes Leid" i feel with you for sure.
Talked about your MAKITA Setup with a friend of mine this week.
Was asking myself how you doing, hoped for something better (-:
Sorry for your shoulders
Yeah! After a shitload of designing, building and testing we can finally reveal this next-level-shit!
Available for both DD versions, with integrated stainless steel counterpart for the v-ring:
The inside is prepared for a AS5047 magnetic encoder evaluation kit including some cable routing:
I guess this housing is the only part on an electric mountainboard, which looks even better when it gets dirty:
. .
The driveguards had to take some abuse in the last weeks of testing:
. .