That is free shipping in the USA. Shipping for the mount to the EU should be $14 so I will just refund the extra amount that you paid
Ah cool, thanks.
I did not place the order yet, shall I do it and u do the refund afterwards or u send me a code or something to put it beforehand?
Will check out with PayPal, am I the first? 
I can’t give a coupon for shipping unfortunately. You can just checkout and I’ll refund it. You will be the second 
Perfect, thanks, I will hit the button after dinner.
Just wondering if you got the tax thing straightened?
I was wondering if anyone would be interested in 12s4p and 10s4p 30Q packs. They will have a BesTech 80A BMS and all the fixings. They will be pre order only because they take up a lot of capitol. Shipping in late January / early February.
12s4p - $379 10s4p - $299
Both will have the BesTech BMS with eSwitch, Charger, and % display. Flat pack style to limit height. Pre order only, price does not include shipping to you. USA only.
This is just a feeler, nothing set. I’m not sure if there is any demand, so let me know if your interested.
9 Likes
I would be I interested in one of each, depending I. The geometry.
They would be flat, but to but with just shrink wrap, no hard casing like before.
1 Like
I’m down for 1 if each of you wait till after Christmas for payment. Pretty tapped out for a couple of weeks 
1 Like
No problem, I can cover a few of them, just not 10 of each
1 Like
By the Fri after Christmas I should be straight. Just trying to stay out of savings and credit cards this year, if possible.
@JLabs Might be interested in 12s4p depending on length. Not sure how long that with four FocBoxes would be like
Ill buy it. For sure 10s4p
I would buy both if only they shipped overseas. =(
1 Like
Im wondering which kind of BMS’s you need / use. If you could take a minute to answer the poll it would really help me figure out accurate order quantities.
- 10s Li-Ion
- 12s Li-Ion
- 6s Lipo
- 8s Lipo
- 10s Lipo
- 12s Lipo
0 voters
I have some thoughts about battery options
Perhaps you ought to start a new thread for this? I don’t think this has much to do with flywheel pulleys.
I try to keep my sale (adv) posts to a minimum, so I’ll just keep it in this thread (I can change the title)
2 Likes
Here’s an idea:
How about selling flat 3s4p 18650 packs that could be connected together in series (bullet connectors?) to make larger capacity 6s or 12s packs? These would come with leads for balance charging, for those customers who do not use a BMS, or have 3s chargers or alternatively they could be plugged into wiring loom kit that includes a 6s or 12s BMS which is available separately (or altogether in a kit).
This would allow flexibility in the capacity of lower budget builds (who might use 6s voltage) to swap out using modular battery packs, or increase the voltage by adding more packs when improving or upgrading their decks. Similiarly, the fact that the pack is small, predictably sized (and hopefully under 99 WH?) there would be flexibility in were it was located on your deck, using the same battery system for a deck with a split enclosure, or single main enclosure.
The only time I have seen this sort of this thing executed well was @Eboosted’s build:
I was going to start my own thread about modular battery systems, which would hopefully permit international customers to purchase.
What do you guys think?
I tried that approach before, to tell the truth was not worth it.
-
Most airlines won’t allow to travel with 18650 packs even if they are below 100W/hr, Li-Ion batteries for electric vehicles are forbidden and considered as dangerous good with high risk for airline carriers.
-
Even if the airline states on their policy that you can travel with Li-Ion batteries, you will be subject to the decision of the airline agent, you could always lie to them, but then it defeats the whole purpose of a travel safe battery
-
Even smart bags with a low capacity batteries have been prohibited.
-
A battery made of packs connected together with bullet connectors is extremely dangerous, if they disconnect somehow or get loose because of unavoidable vibrations of a daily use, they will spark constantly and could ignite inside the enclosure. The bullets will wear off with time, you can not avoid it.
-
I wouldn’t ever want to be the guy whos battery ignited in mid flight and cause a hazard to 200 passengers and is now facing a millionare lawsuit from the airline and 50 passengers who almost lost their lives and their kids.
-
Finally, if you decide to ignore all risks and go ahead and fly with your board, you will travel with a lot of stress knowing that you might end up with a confiscated USD 400 battery, going uneasy through all security check points, praying God for the batteries to not ignite in midflight and thinking about how are you going to sell your house to pay an expensive lawyer.
Guys just ground ship an extra set of batteries to your final destination and enjoy your trip.
5 Likes
I decided against using this pack in a personal build. I need to get rid of it so PM me for a way to good Christmas deal.
https://buildkitboards.com/products/10s3p-9000mah-30q-battery