IN ENGLISH PLEASE ! Repeat after me : Brian is in the kitchen vas voir sur le site de freebord sinon
2 Likes
Why you don’t speak french .it s bad .
Question on the S2’s, can they be comfortably worn on the inside of the foot instead of the outside? …and would that make any difference if you need to bail?
I think it would be really strange on inside of foot. I’ve fallen with them several times and I can always easily pop off the board.
I use them on everything.
2 Likes
So has there been any updates on this?
Still hard to believe nobody has come up with a design or solution on how to make similar function bindings… or whoever did it has kept it to themselves…
I imagine it shouldnt be that difficult (to come up with working design) and then print it with strong filament and in worst case, reinforce it with steel bars or other reinforcement
Otherwise it is a shame only open type bindings are the Freeboard ones…
1 Like
I would really like something like this for a drop down deck.
I have no experience with designing such things though, so I’ll have to leave it only as a brainstorming idea for you mechanical engineering wizards.
6 Likes
Done. I am a genius. NASA should hire me
48 Likes
When is the group buy bruh?
4 Likes
Chrome plated, nice! Classy!
3 Likes
Hey what kinda shoes are those? Can’t make out the brand from the photo.
I’ve got a working model ready for 3D print but it’s super angular since my cad experience is limited. It works though, I can get around to sharing it tomorrow.
If anyone with more cad experience or bindings on hand wants to take the file and smooth it over I’d be more than open to it.
5 Likes
I could possibly help… you know where to find me 
3 Likes
Nordikas 
1 Like
Yeh a design to work upon would be great… im not into 3d modeling but perhaps if we had something to go on, it would be a lot easier to improve it over time
Sharing to the 3D masters napkin, but don’t have time to make somethng better than ths right now
You have a post maybe 70mm tall on legs (in pic it’s a base) Instead imagine having the base as one of akhlut’s x-things mounted onto the skate truck holes.
There are 3 lines of ratchet notches(2 may be better) running up to the top allowing you to have a foot mount which has a large ring which goes onto the rachet pole, the ring would have 2/3ratchet clips built into it.
Depress the clips which have springs in them of course and you can swivel the mount regular to goofy and also adjust for height
Threaded bar with securing nuts could be substituted
@banjaxxed Idea about a metal rod, which makes the binding adjustable looks good…
Though, do u have any ideas from what material to make the actual binding? Would it be possible to bypass 3d printing at all and use something already existing?
Same problem im facing with mud guards… would be cool if something was easy to be made with existing materials and resources… otherwise it goes back to 3d modeling and 3d printing once again
It’s a problem, I don’t think 3D printed parts could survive the stress, but maybe if bolstered with something like a metal bar through a channel of the foot part…carbon wrapping is an alternative
I’d be happy to take a crack at it
1 Like
Maybe some fiberglass would work too?
2 Likes
I would be happy to help, both with modeling and stress considerations. Can you describe (generally) what is the goal? Maybe with pictures.
Dani
2 Likes