I knew I’d forget something when calculating… Forgot motors in my calculations… well over £1100 build not including connectors and wire etc… oh well. Price still stands at £850.
1 Like
Damn man. If you part out I need that deck 
(with enclosure if possible)
I like that one very much! Does the enclosure fit the Cantellated Tesseract? Can you tell me which motors, motor mounts, pulleys and belts you used? Trucks are 50° base?
PS: no offence, but you should think about using bushing that fits your weight and riding style instead of tighten the stock ones up that much. This would be the proper way to adjust your truck
it was so beautiful 
1 Like
Hi @Luuke, no offence taken. Mr seasonal postman has lost all trace of hard bushings… I need all the help I can get though. I have no local shop to talk to or no crew to mix and match what works and what doesn’t. So suggest away…
I pinged an email to Loaded a few weeks back to see if the two decks were made on a similar mould but they never got back to me. They do look a pretty similar shape. The trucks are 50’ base (calibers), the mounts are enertion clones, belts currently 12mm but have 15mm coming. 15mm steel pulleys bearing loctited to the shafts. Wheel pulleys are alien power systems 32 tooth aluminium.(15mm) Motors 6355mm unbranded but I think you’ll recognise them in quite a few of the esk8 vendors.
You could change to 44° for more high speed stability. Or try different bushings (duro and shape). But that’s up to you. Maybe @Alphamail can help you here: https://www.electric-skateboard.builders/t/bushing-set-up-help/42036/11
Motors are 190KV unsensored?
1 Like
No it runs sensored foc. Thanks for the pointers!
Hi is it still up for sale ? Would you part it out ?
Hi, it’s long gone. I do have quite a lot of parts though. What do you need?
1 Like
What do you have? 
@taz Raptor 1 without battery. (Dead cells) 10s bestech charge/discharge bms. 12mm 36teeth pulleys. Abec and kegel. 97mm abecs 10s, 12s tiny bestech BMSs without balance! Enclosures for many boards. And my mind goes blank…
2 Likes
What types of enclosures do you have in stock atm ?
No stock but I have moulds for a lot of boards. I make them on demand… (a little after demand)
1 Like
Ben, why not make a list of the boards you make enclosures for?
2 Likes
As @taz already said a list of enclosures would be very helpful. With measurements and everything. So one could estimate which one to choose.
That would be greatly appreciated
Landyachtz Evo 39/falcon 40 single
Landyachtz 9two5 single and double
Landyachtz switchblade 36 single
Loaded Tesseracts single and double
Earthwing supermodel double
Tayto/spud single
Hummie decks single and double.
There are more in the offing but getting round to them when I can…
7 Likes
How much would you charge for a Tayto double ?
How much range do you need?
I`d like to have dual 6355s with quite a punch so i would think 10s4p ?
I have dual 6355 with 12s3p and they are quite scary on such a small deck.
IMO you do not need any more power in the Tayto but ofcourse your case might be different.
2 Likes