Is there a guide for assembly?
Or what all needs to be done for the unit… Trying to assess the difficulty in consideration of my skills/tolls.
Hey @bimmer. I filled out the form stating I would like 4, I didn’t have a username at the time. Thank you sir
@bimmer Payment sent. I used a fee calculator so hopefully the total is right. If not let me know.
So my plan is to Print off the BOM and to add each Component to the line with its description and location will that work for everyone?
That sounds good to me. I’m pretty confident that I can work it out no matter what you do, however
That would be helpful, I like the plan. @bimmer If you still have any available I’m ready to send payment. Just need your paypal! Thank you
Can you renew your list of people who have paid and shipment info.? I didn’t get a receipt perhaps because you are busy making kits . Thanks.
Yes printing off the detailed bom(bill of materials?) picture is nice, as far as the stencil files, email them/post on website/or send flash drive, etc, as Im leaning toward making a mylar or stainless one myself. Might get a couple more later. Thanks
Could you post these so I could gauge if I think I could do this or not?
These? I need some context.
Regarding printing off each item and where it goes.
U1 | LQFP-64 | STM32F4 MCU | 1 | YES | |
---|---|---|---|---|---|
U2 | SOT-23 | VREG LM3671 | 1 | YES | |
U3 | HTSSOP-56-PP | MOSFET Driver DRV8301 | 1 | YES | |
U4 | CAN Trans TJA1051TK3 | 1 | YES | ||
U5,U6,U7 | SOIC-8 | AD8418 | 3 | YES | |
R27 | SM0603 | NTC resistor (temp sensor) | 1 | YES | |
L1 | 2.2u | SMD0805 | 1 | YES | |
L2 | 22u | inductor_smd_8x8mm | Power Inductor | 1 | YES |
X1 | 8MHz | Crystal 8MHz, 10PPM | 1 | YES | |
Q1-Q6 | DIRECTFET L8 | 6 | YES | ||
R24,R29,R32 | 0.5mOhm | Shunt 0.5mOhm | 3 | YES | |
D5 | 5V | DO-214AC | TVS diode 5V | 1 | YES |
D4 | 60V 2A | DO-214AA(SMB) | Shottky 60V 2A | 1 | YES |
C21,C32 | 100uF, 6.3V | c_tant_B 1210 | CAP 100u, 6.3V | 2 | YES |
C37,C39,C40,C41,C43,C44,C26,27 | SMD1210 | CAP 4.7u, 100V, 1210 | 8 | YES | |
C1,C7,C28,C58 | 100nF, 50V | SMD-0603 | CAP 100n, 50V, 0603 | 4 | YES |
c23,c24,c25 | 220nF,25V | SMD-0603 | CAP 220n, 25V, 0603 | 3 | YES |
C3-C6,C9,C10,C11,C12,C13,C14,C15,C17,C20,C31,C33,C34,C35,C36,C38,C42,C64 | 2.2uF, 16V | SMD-0603 | CAP 2.2u, 16V, 0603 | 21 | YES |
C29,C30,C45 | 4.7nF, 50V | SMD-0603 | CAP 4.7n, 50V, 0603 | 3 | YES |
c2,c8 | 15pF, 100V | SMD-0603 | CAP 15p, 100V, 0603 | 2 | YES |
C18 | 120pF, 50V | SMD-0603 | CAP 120p, 50V, 0603 | 1 | YES |
C16 | 6.8nF, 50V | SMD-0603 | CAP 6.8n, 50V, 0603 | 1 | YES |
C19 | 22nF, 50V | SMD-0603 | CAP 22n, 50V, 0603 | 1 | YES |
C22 | 15n, | SMD-0603 | CAP 15n, | 1 | YES |
C46,C47 | 680u, 63V | 30x12.5 mm | CAP 680u, 63V, | 2 | YES |
D3 | SMD-0603 | LED Green, 0603 | 1 | YES | |
D2 | SMD-0603 | LED Red, 0603 | 1 | YES | |
D1 | SMD-0603 | LED Blue, 0603 | 1 | YES | |
r25,r26,r30,r31,r33,r34 | 4.7ohm | SMD-0603 | R 4.7ohm, 0603 | 6 | YES |
R6,R35,R36,R37 | 100ohm | SMD-0603 | R 100ohm, 0603 | 4 | YES |
R8,R9,R23 | 220 Ohm | SMD-0603 | R 220, 0603 | 3 | YES |
R7,R40,R41 | 1k Ohm | SMD-0603 | R 1k, 0603 | 3 | YES |
R16,R18,R20,R22,R42,R43,R44 | 2.2kOhm | SMD-0603 | R 2.2k, 0603 | 7 | YES |
R10 | 3.3kOhm | SMD-0603 | R 3.3k, 0603 | 1 | YES |
R13,R28,R39 | 10kOhm | SMD-0603 | R 10k, 0603 | 3 | YES |
R12 | 15kOhm | SMD-0603 | R 15k, 0603 | 1 | YES |
R11 | 18kOhm | SMD-0603 | R 18k, 0603 | 1 | YES |
R15,R17,R19,R21 | 39kOhm | SMD-0603 | R 39k, 0603 | 4 | YES |
R14 | 220kOhm | SMD-0603 | R 220k, 0603 | 1 | YES |
R2, R3 | 22ohm | SMD-0603 | R 22R, 0603 | 2 | YES |
P1 | USB | USB Connectors 5P MICRO USB TYPE B RECEPTACLE | 1 | YES | |
P8 | SWITCH | SPDT on-on | 1 | YES |
go to stewiis thread and click the link to his Dropbox, there you go.
That would be great, also a video as @uigiroux suggested would be really great!!! Also how to upload the firmware, I know that for your is too easy… but would really help…
If you put this BOM in an .ods spreadsheet file and put it on github, you can drop a link to it here
Drunk video is what he deserves so, what could possibly go wrong
well… no worries… they said that this B-box is bullet proof… so… drunk is not a big deal… i guess…