Whoosh! Motormounts for Caliber, TB, Surfrodz

Yes :+1:that’s one of the ideas behind the mount solution. Same hole pattern for all plates and trucks

2 Likes

So the motor plates needs to have a center to center distance of 80mm instead of 72mm to fit on the Surfrodz as well as Calibers. This is how it will look except with 12mm motor pulleys:

IMG_20190109_003540

IMG_20190109_003713

11 Likes

Looks great. Are they mounted on a E-caliber truck in the pictures above?

1 Like

no, those are surf rodz tkp trucks.

2 Likes

@Indiangummy is right. You could use them on E-calibers also with the caliber clamp if you like. I will split it up into different configs on the website when they are ready.

2 Likes

I have the longer motorplates for rearward mounting in the works now, any feedback is appreciated.

  • C-C distance = 95mm ± 4mm

  • Black AL7075 6.9mm thick, 5.9 at motor.

  • Fits clamps for SR TKP, TB218, Caliber

  • Bonus: Possible to run 50x motors as well with adjustable idlers.

2019-01-12_16-38-28

2019-01-12_16-42-05

15 Likes

beauties!

oops. forgot this: 10 chars

2 Likes

Nice job!!

1 Like

Thanks! :+1: I will produce these, the 80mm motorplates, tkp clamps, 16T motor pulleys and maybe some modular Kegel pulleys 36t, for 12mm belts.

Also there’s 20%off on the fixed mounts on the webshop from now until next week!

1 Like

I just bought the " Dual mount complete – with idlers and crossbars" from the website! Your mount design is the only one that ticks all the boxes for what I was looking in a mount (reliability).

2 Likes

It looks very well studied and well thought out! I like all the possibilities without compromise.

And those … hooooooo :scream: :exploding_head: :+1::+1::+1: I want to ride your board man !! Is it going to be your own esk8 ?

3 Likes

I have spent way to much time designing these mounts :joy:

Yes, it will be my own esk8, you can have a go if you visit Tromsø some day :+1:

I posted my first impressions of the dual mount kit (without taking it to the road yet) in another thread:

1 Like

@Mikaelj Where can I find the link to the 3d printed belt covers? Thanks.

@gmurad I will send you the link later today. What wheelsize?

Thanks. It’s 90mm

1 Like

@gmurad Here you have it for 90mm wheels without idlers: https://www.thingiverse.com/thing:3469290

Will make some different versions and put on the website later.

90mmwoidler

2 Likes

Thanks! I will print these and try. Will report back with a picture

1 Like

@gmurad Did they fit well? Or any changes needed?