I have finally decided to build an Electric skateboard. I have a pretty limited budget but I am a lightweight rider which i can probobly get away with some 3d printed parts and single drive. I will also laser ingrave the name of the board in the board. Pictures bellow.
These are the parts that have chosen for this build:
Motor: https://hobbyking.com/en_us/turnigy-aerodrive-sk3-6364-190kv-brushless-outrunner-motor.html
Bearings: Already have
Remote: Already have
Battery Charger x2: (I will connect the two chargers in Series to get enough voltage) http://www.ebay.com/itm/PS-1A-Adjustable-Voltage-Power-Supply-Motor-Speed-LED-Control-Adapter-Charger-/272611133971?hash=item3f78e3ca13:g:OrQAAOSwol5Y3LzT
Belts: https://www.unikboards.com/en/boutique/courroie-htd5m-9mm265mm/
Motor Pulley: https://www.unikboards.com/en/boutique/poulie/
Wheel pulley: 3d print
Motor mount: 3d print (if it doesn’t work i will buy one)
This will bring the total to around 6000Nok (roughly 750 Us dollar after tax and other expenses we get In Norway)@
If there is anything wrong with any of the parts please tell me because i am new to this:)