Love what you’ve done with the rear lights.
this cat vinyl speaks to me on a spiritual level.
2 Likes
1 Like
@Riako Intrestresting research man. What are you looking for? SL mad SW is stator length and width?
2 Likes
I was curious, and as Flipsky ask me to open the motor ^^ I open all I can around me 
This is just the outrunner cage length, and width yes 
Also because I would order some MTO6880 … [spoiler](or 8085…)[/spoiler] and they are the same as the MTO6374 that I ride since summer 2017, really strong and well made. So I want to compare them with the FS6380 from the inside. And DAM! if it was made as well as the Maytech it will be really strong with the 53.5 magnets instead of 41 ^^
What I like is the square size of the rotor 53x53.5mm… It sound like the gold number to me 
I’m lost, I think I would love to make my custom motor 
4 Likes
Yes. Its bigbens DS one
So. Wait S L ans S w what do they mean? It’s only about the motor can or one are the magnets? Why you didn’t measure the stator?
ho sorry,
L = length of the can/cage
W = diameter (I should note D ^^)
LS = Length stator
WS = Diam stator
Weigth = do come
ah ok so I was right SL and SW refer to the stator. Interesting data. The DD you are getting has 53x45mm stator. Bigger than the 6374 motors you measured
1 Like
you’re right !!! Can wait to get them (my previous MT9055 800w hub was 51 x 30mm … )
that’s a standard size for hubs. It’s what I had before as well.
Thanks, Looking forward to what you build with, what battery are you gonna use? Can’t wait for mine
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-2/88821/399?u=b264
The calipers say “75.8mm”
4 Likes
This man is bringing back the classic memes. Was always one of my favs.
1 Like
Samsung 30q
1 Like
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-2/88821/404?u=louwii
@brenternet so you’ve decided to stick with Abec11 Flywheel? I’m curious to know what you think of the TB110? And why they aren’t as good as the Flywheels?
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-2/88821/426?u=akhlut
What machine is this?
1 Like
Its a Creality Ender 3 with a few 3d printed mods. works very nicely im a 3d printing noob this is my first one and i got it about 2-3 weeks ago and my prints almost always come out nice.
3 Likes
Yeah. The prints are looking great! Pretty amazing how good this stuff has gotten. I remember the old reprap days…shit took forever to tweak and get right. These machines seem to just work.
Imma get one i think.
3 Likes
You wont regret it man. Its gone down in price alot too. The ender 3 can be found for $189-200 shipped. It comes with all the tools to build the machine, snippers, zipties extra fittings a spatula and even a bit of filament. I was surprised to find those extras i was not expecting that.
3 Likes