The 44 is a different platform that with geometry that reduces flex, and I can make one for you that is constructed for a bigger guy. DM me on IG if you want to think it through.
3 Likes
I forgot about the bacon in there!
4 Likes
Really that awesome what’s new wheel base space on the deck the website did not list it. I have a spare I have a spare 12s2p 20700 I should have enough space for that
i cannot check the wheelbase right now but it is rather huge for such a small deck. Think it was something like 36 or more. My enclosure is about 33cm long and fits w/o problem.
12s on such a small deck is crazy . But if i had a 12s2p laying around i’ll surely try too 
. Don’t expect the best quality deck , i already broke the 27" version in 2 parts . But that was because i slammed into a wall with it…
4 Likes
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-use-pm/2992/7324?u=riako
want the same setup !! 
beautifull mate !
2 Likes
Hi guys, I posted a photo of my Trampa with concave and I’d like to create a topic to show you how I did it but it looks like I’m not able to create a topic. Do you know why? Thx!
Evo deck, 10s4p 30q, racerstar 5065 200kv, evolve trucks and mounts, boardbumpers bearing adapter, trampa urban treads, 15T motor gear 66T wheel gear. Rides like a tank. IMO don’t use the evolve trucks I have them wedged as if you don’t the front truck will be slanted and lean down. They’re super wobbly at speed and really high up with this setup. I have TB 218 trucks on order and plan to switch to dual 6374 190kv maytechs.
3 Likes
beautiful work.
Click here: https://www.electric-skateboard.builders/c/e-board-builds
Then please select [+New Topic] (if memory serves)
@treenutter is an admin, perhaps can help.
Looks great ! 
ervinelin make almost the same on his Lacroix, but in a different way.
Here I like, that you enlarge the trampa deck ! Yes got big foot.
Wan’t the same bro !!!
2 Likes
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-use-pm/2992/7311
i need dis, can you link it?
2 Likes
4 Likes
I think it’s it :
Got this one dual, working super great seens last year,… I saw it un quad too …
1 Like
Thanks thanks thanks a lot bro !!! Once my printer is back from don’t know where the fµk it made it !
4 Likes
oh i see, it’s a balance charger. thought it was a volt monitor.
nevermind, carry on.
1 Like
Riako’s got it right The more expensive one does faster balance charging… mine caps out at 2.2 amp per channel when balance charging which is a little annoying
Nice design! Would you mind to share the stl files with us? 
2 Likes
Thanks mate! Yes of curse I will share it but it needs some or should I say a lot of perfectionments …
I was talking about that here :
The main problem is that actually, my printer is not working 
so I’m a bit embarrassed to share without a test … I put it on Thingiverse
1 Like