no to be honest , but there is little more, the aesthetic result without mold and machine for the vacuum was a shit then layered a thin layer of black epoxy putty and then sanded, more than satisfactory result for the means and budget. But it works perfectly, the only thing is that obviously the invisible carbon fiber is so wasted. Soon I hope to redo this enclosure this time also with the mold and with the vacuum machine that is coming from China, always useful for many projects. The form of the enclosure will also be particular and never seen on a trampa : P. In the meantime I graduated and ran with the kaly gear drive. Soon I will also have to rearrange the deck because after a good shot that has bent the axis of the infinity some inserts has yielded and a little out of laziness is still so. If you want photos of the present I can do it
I do not like these type of discussions so im just going to stop replying untill i finish with the vendor
Ok. I just want everybody to be save that’s all…
Yeah I’d like more pictures, the mold looked good
Where did you get that thing in the front?
Looks like the bull bar is from trampa. You could make one line this
Me likey. I think some gbomb drop brackets would look cool, well if they weren’t $150
Trampa bullbar http://www.trampaboards.com/t6-heat-treated-aluminum-bull-bars-with-rubber-end-bungs-p-25543.html… although @pat.speed’s link looks pretty cool too… i wonder if it rattles at all
Thank you, Etoxx also has a nice one but 99 euro is a bit to much for me haha.
The handle bar extensions I use are super cheap, £7 a pop. Only issue is they need 3D printed collars to attach to the trucks. They’re really strong, but I’ve yet to ride with them.
I have a similar shaped deck, Loaded Dervish that nobody is buying. So I might cut it for science also @nuttyjeff, yours looks like it’s bamboo and is flexible. Does is still have flex?
I would agree to not name the switch vendor as almost every brand of e-switch has blown up so no point singling out. Also could be random failure or something weird with the installation / usage.
Im sure there are guys on this forum that have killed like 20 e-switches of all types.
Nah it’s not defective, all of the antispark on the market have a design flaw where each on/off cycle slightly damages their FETs
Waiting for one with a precharge circuit. Basically one FET that turns on first with a 5.6 ohm resister in series – then a bank of 1 to 5 FETs that open up for the main power to flow through. Sounds basically exactly like a loopkey being plugged-in, eh? LoLz
Essentially, you shouldn’t be operating any of them in linear mode because the inrush current WILL damage them slightly each time
Yeah it’s bamboo and has quite abit of flex. Had nothing to do on a sunday morning so decided to cut and spray it for fun. Haha.
https://www.electric-skateboard.builders/t/no-words-just-pictures-delete-words-use-pm/2992/8007?u=grozniy Custom Marc’s mounts for enertion front truck?
Maybe he wants the same as Tumbler front drive
Hes building a raptor 3