Oh, cool, I want a video of your building! One at the street
1 Like
I have some pb with the support for the 2 part enclosure, so :
I make it differently, now the trap for the top to make again !
1 Like
So you cut the middle reinforcement ? Did you have problems with for placing elements inside ?
BTW, the work you did for this second red-CF wrapping is awesome !
1 Like
Thx mate !
The bi-color miss me but it a lot better like this 
https://monlongboardelectrique.files.wordpress.com/2017/02/wp-1486780637638.jpg
YEs I cut it … the space for the lipo was to short, or they cant inflate !..
Everything fit inside, 5 lipos, dual VESZCs that are ready and programme with the motor.
Now, just the trap and rebuild all !
2 Likes
Any news ?
Or are you still running after free time ? 
ALWAYS 
!!!
But ok, some news … between ride of this little baby 
Complet new setup
And it’s realy cool, perfect cruiser for summer !
Nothing exist from the back, no wires, no connector, fully closed juste the trap on the top.
1th I parameter the vesc for this little 22amps motor … 0.01 start up boost, and I wasn’t really ready for so less power
But after some more prameters up (25Amps batt and motor max current control actualy (soone watt mode with 900w max) and the custom curve for more acceleration and less punch at top speed).
Cause when your rolling (lets say around 20kmh or more) when you push the throttle is pretty good for what I’m looking for. I go up to 30kmh and really could push more ! (enought for me)
But after just 3km of run they are terribly hot !!! (dont know how the indise support this …)
The freewheels is super cool when you kick the battery and need to return home at cut off start.
The urethane isn’t that bad, and the Ronin truck are just a killer for electric setup ! Stable and super carvy same time. Love them !
Finaly love this setup after some ride (just around 50km)
Just my carbon deck is terrible for me… I really don’t like the hardness of it ! And carbone is really reasoning dont like it too.
(If someone want it let me know)
For this smooth elec setup I’m waiting for a new deck (but old version - 2015) an Arbor Axis Koa 
!!!
Flex, lower …and should look better with this 90mm wheel !
see ya
PS : I’m on something else who should be cool,… the upgrade of my Darth Vapor 2016
5 Likes
Some more photos …
https://monlongboardelectrique.files.wordpress.com/2017/06/img_20170613_215050.jpg
2 Likes
What have you done to yours Aps motors?
All the parts changes was sold … (You know why I can’t change/edit my tittle ?) …
And cause many project @ the same time !..
There is just the deck on sale now, it isn’t realy my style (plus I’m 1m95, I love long and flex deck…)
MP for more info or if you get an offer
2 Likes
When the 10s3p pack drop in the deck when arrange stuff around me …
1 Like
Where those 190mm trucks?
Those was the 180mm Ronin Raw Cast Truck modified for Mayteck hubs following the Kaspars Dambis tutorial :
1 Like
Nice build man! Do you still got the hubmotors running? They look pretty nice actually, where did you get them from?
1 Like
Hey, thx Bart 
No, sell them with the CRonin and DualESC to Pimousse last year. Their was from Maytech (MTO9055-HBM-60-HA hub motor)
I’m trying to make my own DIY’s hub this summer ! Bigger !!
1 Like
Hi e-rider !
Well… time passed fast, projects slips and sleeps 
But motor was a bit more custom, still not to final point but I’m getting closer and closer !
The project :
Maybe the MTO9055 like with an APS 8072 70kv and a Gummies 125mm 
But I’m just - to late - seeing bad feedback about this motors … but at a way higher kV ( 4 x more). I was asking myself and mostly to you, what to do to prevent any fails. did this look like a better way to upgrade them ?
The stator copper/wires, should we resin it ? https://discourse-cdn-sjc1.com/business6/uploads/openrov/_optimized/5bc/d06/d93c2e0a29_543x480.jpg Maybe the cage too ??
3 Likes
Tomorrow I will go to the CNC shop give them the last industrial bearing missing for the seat of the “new” or should I say custom stator to the rotor in … I really hope to could make some photos in place !!!
Now that all of this is started real (got motor seens last Xmas, motor to CNC shop seens the start of the summer), once I get back my stators I will try some custom of the wiring … 
Those 80XX bigbadboy don’t play !.. The force of the magnets are huge compared to a 63XX !!! I got to make some Mac Giver tricks to put them off… Surprisingly take no pic of that 
All that is just totally new for me, please don’t hesitate to help and give any tips you got 
2 Likes
Plop …
Hi e-rider !
Ok, thanks to @rey8801 , it’s time to start to make it again (now that I leave at the edge of a river, got 100kms of cool flat bike path). I think about his little sister around the same spirit but 3 years later! 
Highly inspired and motived by the last @Linny mini-sick build, Also, this gorgeous @Mikaelj KutThaka with SR TKP and many others.
- want to keep a deck as shorter (around 36")
- If I make it integrated again, not sure but, I would like the cover under deck
- A dropped deck would be cool too (with a W concave, deep pedal etc)
A bit like that about the shape :
But with the outer general look as a mini surf deck (I hope you can follow me 
):
(thanks also @cmatson for the inspiration too !)
- I m very hesitant about the choice of trucks against, yesterday I was still sure to leave on Cronin, but now I would try also SR TKP more suitable for a small cruiser.
-
Battery pack: I guess I will stay with the still same slim solution of 5 (or 6 maybe this time) x 2s lipo for 10s (or 12S so) 5Ah pack, that as almost 4 years of use now.
-
ESC: I hope to revive 2 focbox for the occasion, otherwise we will find something else … The unity makes me an eye for sure! …
I will make another thread soon I guess 
Also,
I do not give up, it will be 3 years since I started to think about it, it’s been 2 years since I have the motors, machined last year (for the stator, I have start DIY the rotor by hand …) but I have a new idea and it will be for AT wheels in the end, this year is the good fishing!
Stay tuned 
6 Likes
Nice project man! Following
1 Like
That carbon wrapped deck is amazing! WOW why have i not seen this yet?!
2 Likes
The SR TKP hanger profile isn’t round, but there is a model of the hanger in thingiverse, I’ll try and find the link for you.
1 Like