AT hybrid style board build

[M.Hboards]

For this board i wanted an hybrid AT style board that looked simular to an evolve performed better and dident break the bank.

Deck: For this build i used a bamboo maple deck from skateshred it has a bit of flex but not much. https://www.skateshred.com/wholesale-blank-longboard-decks/blank-drop-through-decks/wholesale-bamboo-drop-through-deck.html

Enclosure: 3d printed useing great a design by @toughook

TOUGHOOK ENCLOSURE Electric Skateboard MODULAR ESK8 Battery Case by toughook

Drivetrain: Tb 218 trucks https:///collections/longboard-trucks/products/torqueboards-218mm-trucks @Boardnamics 50mm motor mounts https://boardnamics.com/product/motor-mount-for-electric-skateboard-v1-0/ 5065 200kv motors https://m.aliexpress.com/item/32919822111.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32919822111&aff_trace_key=07b4b40c98bc48bc95e9d0a485e9d4e0-1553732424523-06318-WHibSjA&aff_platform=msite&m_page_id=8600amp-anR8OfHEZuV5kpPCTMB48A1555097416521 15 tooth motor pulley, 60 tooth vex wheel pulley https://www.vexrobotics.com/vexpro/motion/belts-and-pulleys/htdversapulley.html
Everything was eventually painted black.

Wheels: Ali express 6x2 wheel with a 3d printed a @TheImmortalJew vex pulley adapter with a 60t vex pulley. https://m.aliexpress.com/item/32896718916.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32896718916&aff_trace_key=07b4b40c98bc48bc95e9d0a485e9d4e0-1553732424523-06318-WHibSjA&aff_platform=msite&m_page_id=4993amp-anR8OfHEZuV5kpPCTMB48A1555097072461ulley.Uploading: 0314192106.jpg…

Esc: X2 flipsky 4.12 vescs

https://m.aliexpress.com/item/32953597292.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32953597292&aff_trace_key=07b4b40c98bc48bc95e9d0a485e9d4e0-1553732424523-06318-WHibSjA&aff_platform=msite&m_page_id=1863amp-anR8OfHEZuV5kpPCTMB48A1555097709982

Battery: Built by me 10s4p flexible 30q battery pack:

Remote: flipsky vx1

2.4Ghz Remote VX1 for DIY electric skateboard

And finally some pics of the complete board minus my anti spark switch that hasn’t come yet so I’m using a Loop key for now!

[Arzamenable]

How is that remote treating you?

[M.Hboards]

Pretty good so far the feel is great and the control is smooth.

[Bobby-gg]

Nice build.

I’ve just fitted ones of those motors on a single motor street build, seller on aliexpress was doing it for £20 ($26) shipped - bargain

[Toughook]

Looks great, and thanks again for using my enclosure design. You’ve really proved my concept in a spectacular fashion. Can’t tell you how stoked i am that you spent the time and effort to print those parts out, especially since there are myriad other options out there.

I’ll sleep happy this evening

[M.Hboards]

Don’t thank me thank yourself you did a great job with the design and thought it through really well.

[rey8801]

Really nice build. Do you get wheels bite?

[M.Hboards]

Nope non at all!

[rey8801]

Cool I will have a similar setup and was wondering about it.

[M.Hboards]

With your new custom deck?

[rey8801]

Well one of it. The at deck should be fine since is made for that. Although I would like to try AT wheels also on the BullyDeck but I was afraid of wheel bite. I should get it in the next 10 days finally.

[mishrasubhransu]

Good job, @M.Hboards. Did you calculate the total cost of the build?

[M.Hboards]

I think it was around $800.

[M.Hboards]

Update: I’ve been riding this board for a little over a week now and it’s been amazing! This was my first time useing pneumatics on a board and i absolutely love it to the point where i now go over bumps on purpose! I finally did a proper range test and i got an incredible 17.5 miles out of the board’s battery - going full throttle 90-95 percent of the time with no noticeable voltage sag until I hit my vesc’s low voltage cutoff! Below is a pic of the log from my range test ride. The reason it only shows 16.9 miles is because by mistake i dident have the tracker running for the first half a mile.

And another picture of the board in all it’s glory-

[Bataleon]

This has gotta be one of the best affordable AT builds I’ve seen. What do you have your low voltage cut-off set to? And what temps did the battery get to during your range test ride?

[M.Hboards]

My low voltage cut off is as follows-

Start- 34v

End- 31v

I dident check the temperature of the battery at the end of the ride but i do have the ability to as i have a Bluetooth bms on my battery that has 2 temp sensors that go into the pack but i don’t know how accurate it is. However i did feel the motors and like i expected they were a bit warm but not alarmingly hot.

[Bataleon]

Cool. What do you have your motor and battery max/min currents set to?

[M.Hboards]

I believe i set both my motor and battery currents at 30,-25 i know it sounds weak but start up/ acceleration/ breaking is strong & super smooth and i never feel that I’m lacking power! I may raise my currents up to 60,-25 or -30 but currently I don’t see the need for it as there’s plenty of power!

[M.Hboards]

Just did another long ride and my battery temperature ranged from 90-98 degrees Fahrenheit throughout the ride but keep in mined it was 88 degrees outside and the temperature sensors are within the enclosure which is probably hot inside.

[Bataleon]

That’s really decent, thanks for the update.