I called FedEx because it was saying delivery was scheduled for today but the package was still in Japan, apparently some transit delays, so it will best case be delivered on Monday.
The torque values were listed in kg-cm. To convert to N-m, multiply by gravity (9.81 m/s^2) and divide by 100
So for example, the 6374 149kV had a maximum value of about 34 kg-cm, which would be 3.3 N-m
(34 kg-cm)(9.81 m/s^2)(1m/100cm) = 34*9.81/100 = 3.3 N-m
.
.
.
.
Or more simply… just divide by 10 for an approximate vale 
Oh yes that is correct, I wasn’t sure what he was asking. All the units are Metric so take the kgcm multiply by gravity, and divide by 100cm/m.
Motor package made it to Memphis Tennessee, going through customs and will be delivered to my parents workplace on Monday. They’ll bring it home and I’ll snap some pics for everyone and their boxes, I got a few medium boxes and by the looks of it, I should be able to fit at least two motors in them. But to be confirmed Monday night.
Package cleared customs, will be receiving tomorrow Monday!
1 Like
Man, it looks beautiful! Just for knowledge, do you talked with Turnigy to make it? And will it be open again?
I talked to Sunray Tech, supposedly the makers of turning.
I posted all the info needed to buy from them in the thread above. So anyone can do it.
Fine, would it be easy to calculate shipping to Brazil? You said that you still have a 6374
All the 6374s are taken.
And it seems like all the 260s come with sensors.
So shipping news:
I may be able to fit 4 Motors into a Medium sized box. it will be a tight fit and I can probably slip in a thin film of bubble wrap sheets on each side. I had these boxes lying around for quite a long time, So I will need to see if these still count as the medium sized After checking the website for USPS for box dimensions, I am not sure these are still valid boxes. There is a post office on my Campus that I can get a box from and redo the boxing.
Hopefully I will be able to ship out motors by tomorrow.
If everyone can send in the shipping payments that would be great. @DilatedPupils $38 with insurance @davidwang $0 (I’ll get you insurance) @CamBo $25 with insurance ( you paid insurance seperately) @SteveS $25 (I’ll cover your insurance) @Lambjr088 $20+4(insurance) @barajabali send your payment if your still down for the motor. (let me know if you want insurance its a few bucks) @Rob.Endless I never got a reply from you. (If not, then your motors go to @PXSS) @PXSS are you still down (based on above)?
packaging right now,
@Lambjr088 @CamBo @barajabali @davidwang Your motors will be going out shortly.
1 Like
Just checked the remainders, I have -2 6374 192KV Short Shaft Sensored @IsTalo -2 6374 192KV Extended Shaft Sensored @PXSS @IsTalo -3 260KV Short Shaft Sensored
but any of this is 6374? I want a big motor
Yup I just added that
I have shipped out everyone order, if I didn’t send you a tracking number/insurance pic let me know.
Tracking will probably start working at around 1-2pm today as that when my campuses office drops off at usps branch location.
@CamBo, I got your message will ship out later this week, @DilatedPupils, need the shipping payment.
@wmj259: Did you have to pay extra for customs and tax besides the shipping cost? Or was all that included in their shipping cost?
As of now, everyones tracking number is live. All boxes are at the local USPS branch.