And I don’t mind filing here and there on the trucks (and solder welding)
I Learned on this forum the benefits of bigger wheels so i added in 90mm flywheel clones into my list,
I live in Europe so Torque boards is not a favorable option for me,
I like the Hobby king motor mount it seems like i can file and clap on, instead of fully filing down my trucks, Would it work with my motor?
I have this mount and that keda motor. For it to work, you need 2,5mm of washers between the motor and mount because of the circlip. The shaft hole is too small for the circlip to rotate. And you need around 17mm of M4 Allen head bolts. This mount doesn’t fit caliber trucks. You can check my post about it. But adding a wedge/washers or filing the clamp, it works. If you buy turnigy trucks and replace the bushings, everything will be bolt on and no modifications required.
If you need, i can send pics of motor mounted
Everything on the eBay China ones are great but the motor pulley. It’s like aluminum/plastics literally has no density to it. Just find a motor pulley from a motor pulley site. I got a pair for cheap that were 15t
@Blitz I used 3 washers between motor and mount to allow circlip to rotate.
With a 15mm pulley, you get around 5mm of pulley protruding from the shaft.
I used 20mm Allen bolts.
I used 40mm holes to mount it.