@Samau18 I’d be interested in a V.0.7 finished PCB.
Hi, I have a Hobby King 6s BMS that I am going to charge my 6S batteries with. How much power do I need to give the BMS to have it charge my batteries. Thanks
Where did you order PCBs from?
I normally order trough Multi-CB, but recently discovered JLC PCB makes decent enough PCB’s as well!
It seems I would need a Level3 account to create the groupbuy account.
I hope Danny don’t mind me starting a sale here. Please keep all inquiries to my PM to avoid messing up this thread. I will try to create a separate post also, but not sure if the admin allows for sales post in other categories.
I will assemble and sell 15 pcs of DiebieMS v0.7.
The deliverable are as followings: 1 x DiebieMS v0.7 assembled. (SD Card and RF module NOT mounted). Components I have stayed true to the original design. 5 red and 5 black x wire connectors (non-crimped) for battery and VESC 4x. 1x Male 16P connector 20 pcs non-crimped terminal for balance cables (some are spares) 1x Momentary switch 1x OLED 0.96 Display 4x single end male connector with cable (JST 1.25mm 5p, 10mm) (Display, switch, canbus) 1x single end male connector with cable (JST 2mm 4p, 10mm (VESC side can bus) 6x M5x14 spacer screws 1x 80A Fuse
Asking for 120USD/pc shipped to major cities around the world via Hong Kong Post with tracking Number. (~8-10 days) destination tax and duties not included. PM if interested, I will create PayPal invoices. Will take ~2 weeks for completion, I have most of the parts already.
Canbus test (*note I am using Ackmaniac firmware on my vesc, that’s why there is a warning)
Current list: @uigiroux (1x Confirmed) @Giga (2x confirmed) @DeathCookies (3x confirmed) @PXSS (2x confirmed) @chsknight(2x confirmed) @Rene（2x confirmed) @Jumpman(1x confirmed) @bflan(1x confirmed) @PatRocks (1x confirmed)
All sold, please message me you email for PayPal invoice if you haven’t done do. That was quick .
I want to let you all know it may be a while until I can make another run with this type of quality built. As a manufacturer, I was able to get limited quantities of the parts. But my suppliers would likely impose a minimum quantity for my next request. It won’t be easy to make another batch unless I get “a lot” of orders. So don’t miss the chance to pick one or a few of these beauties up.
A little background about myself. I own a electronic factory in China (smart home). So I was able to use my resources to make this run possible.
Finally, I must thank Danny for the design. Really awesome BMS.
7 Likes
You would have to make a new thread offering this for sale. But the post is related and on topic with the title.
If there are still two left I would love to get in for 1.
Let me know, thx.
Dammit too late. One of these days I’ll get my hands on one of these…
1 Like
If someone is making an another batch i’m really interested!
Here is the included momentary switch and LCD screen.
If you are interested, please send me a PM. I will make another run if I have received enough queries.
Sam
3 Likes
@Samau18 can you make a new post to see if we can get a big group buy for this. I would love to get one if possible 
I am not level3 yet. Will see how I can start one
2 Likes
@JTAG Do you have board outline CAD with mounting holes or drawingvwith dimensions? I have been asked to do My NESE enclosure to fit your BMS. Also, how many power connectons is there? I see 5 but common - and pack - should be the same ?
1 Like
There is a step file of the design in the GitHub repository
https://github.com/DieBieEngineering/DieBieMS/blob/master/DB10005_BMS.step
I would love to utilise your design with the NESE cellpacks
Thanks mate. How do i buy one?
1 Like
Could this bms be used standalone without vesc(programmed)? If it can, sign me up for one. Where do i pay?
Click on the thread I linked. He will answer your questions. I don’t know if I can answer your questions right now