yeah it was exactly my little problem !
With 2x6S12Ah15c graphene it works fine (something like you 20km range) so I buy 2 more for the backpack.
The setup is at his maximum weight imo. And I actualy get a fully garage/workshop in my backpack (to besure to alway finish the ride). I will make some place for this 2 new babies !!
So got 4x6s12Ah15c / 12s 24Ah 30c if I really want some time (Its easy to add them on the top of the central box).
And I also got small one actually, in case for training at a spot and want a lightweight setup :
4 x 6s 8Ah 15c Graphene too = 12s 16Ah 30c
I dont know if I keep them but I think its good to have too (I can have different weighted setup 12s8Ah, or 12s12Ah that I know well now, 12s24Ah easy with backpack or 12s40Ah for long WE multiride but …HMG that weight in the back …
So grand total of 1776 Wh if I really really want around 80km !?!?
The discharge rating of cells stays the same no matter how You connect them, they still can provide 15C BUT if You connect two 12Ah packs parallel, it’s 15 times new capacity which is 24Ah, so 360A instead of 180 (which in any case is more than enough )
But holy f*** 80kms, that’s impressive I’m more and more leaning toward buying those multistars, if they won’t sag that much (they shouldn’t, even with their 10C rating it’s 160A continous discharge, and I never saw currents exceed like 80-90A burst), they would be really nice long range batteries.
ho yes … thanks !
Yes I could connect my 2 x 12s12Ah pack in // for a crazy lipo pack ( but with the weight its will be more for long cool ride hiking…and after I forget the jumps )
Yes, I thinks 160A its fine and for the price and cool long ride like you say it should work fine … I’m with 180A like you know (I’m with 60amps batt max and 70 motor max actually) and its fine not hot in the closed Drybox, I saw around 70amps batt max in ackmaniac/VDLA …
1st ride on snow here around Paris
as directmeent roll in the water, it’s the same !!!..
she had to sleep in the hallway … she dripped for hours after that … but at least the deck and tires are all clean now
Also, got my 2nd reccorded section on metr app (of only 1.4km ) !.. youhou …
I try anything I guess, now I will send to @Pimousse toswitch it at 9600b so…
Finally back in the Darth adventure, but 1st want to thank you all for your sharing, inspiration, and motivation !!
Particularly @Pimousse & @Yann that I annoy very regularly and always the heart on the hand full of good advice and Squad, @Der6FingerJo, @stewii, @Idea, @LukePL, @Nowind, @DanSkates, @Kug3lis, @longhairedboy (sorry 10 names max …) ESK8-FR and all of you once again for all the good things, words and advice sharing on this forum !
(Also thanks to okp and fottaz for another build that I’m making for Zigm4 that he will show you soon )
Now that I’m making another little training eATB (I target less than 10 kilos), not as powerful as the Darth but as long as it rolls, I have work to at least pretend to do mini jumps !
So I really want to let go of the aesthetics of this setup … we will see where I could go …
the Darth is in pieces. Here is what happened to the deck :
So, I start to remake a DIY enclosure 3D print then layered :
Now a lot of work is waiting for me and I can not wait to re-ride again so, we’ll have to move my ass now !!!
Thanks Dan ! Yes me too
(but, no evolution on the hearth of the board > the amazing VESC6 + Overion transmission and 6374 130kv + 12s Graphene is my perfect combo for now.)
But I would like to innovate and try something different just right. I take all the advice and ideas, what will be an evolution for you ?
agreed, can’t top that right now! VESC 6 really is completing mountainboards.
What i would really like to see is a sick ass looking enclosure for batteries on top of a mtb deck. Right now i only like the Lipos without anything on them because ultraboxes just look so clunky. I originally wanted to print something but i doubt that it would hold up when made out of PLA, and anything else would take really long and get expensive.
Anyways, can’t wait to hear about all your upcoming projects mate!
That would be better than PLA. But i’m not sure about PETG in general , the Benchys i printed with PETG are really stiff and strong, much more so than the pla’s, but i got the feeling that my petg motor mounts flexed more than the pla ones.
WOW - your board has some seriously nice electrics dude! I’m hoping to upgrade to some of these components in the future.
The evolution for me is going to be my riding - I wanna go faster, jump higher and spin more! Btw…finally got round to editing my video and just added it to my thread - check it out!
Don’t really know if we could call it like that it’s absolutely not optimized for space saving or other thing but I want a funny and more out of the ordinary case. So that’s it :
yeah it was exactly my little problem !
With 2x6S12Ah15c graphene it works fine (something like you 20km range) so I buy 2 more for the backpack.
The setup is at his maximum weight imo. And I actualy get a fully garage/workshop in my backpack (to besure to alway finish the ride). I will make some place for this 2 new babies !!
So got 4x6s12Ah15c / 12s 24Ah 30c if I really want some time (Its easy to add them on the top of the central box).
And I also got small one actually, in case for training at a spot and want a lightweight setup :
4 x 6s 8Ah 15c Graphene too = 12s 16Ah 30c
I dont know if I keep them but I think its good to have too (I can have different weighted setup 12s8Ah, or 12s12Ah that I know well now, 12s24Ah easy with backpack or 12s40Ah for long WE multiride but …HMG that weight in the back …
around 80km !?!? 
)
I’m more and more leaning toward buying those multistars, if they won’t sag that much (they shouldn’t, even with their 10C rating it’s 160A continous discharge, and I never saw currents exceed like 80-90A burst), they would be really nice long range batteries.
) !.. youhou …
I try anything I guess, now I will send to 
best wishes to all 
:
(but, no evolution on the hearth of the board > the amazing VESC6 + Overion transmission and 6374 130kv + 12s Graphene is my perfect combo for now.)
Btw…finally got round to editing my video and just added it to my thread - check it out!
it’s absolutely not optimized for space saving or other thing but I want a funny and more out of the ordinary case. So that’s it :
