Clearance Sale on Abec11 Wheels, Chargers, Batteries, Timing Pulleys

With your Press Fit Abec pulleys it says. Compatible with our brushless outrunner models only! what is that about, are you using 3M teeth?

that is just referring to our own product line. these pulleys will work with DIY builds as well… they are 5M 36 tooth pulleys

what kind of batteries are they for the 15 mile Battery THIN?

15 mile Battery THIN (10S3P, 36V 6.6AH) rated for 30 Amps Continuous Discharge

Some 2.2Ah cell with 10A cont. discharge

Samsung? Sanyo? LG? Does it matter much?

Samsung 22Pretty sure

1 Like

ok, just want to make sure they aren’t some no name brand

That’s what you get from those blue wrapped battery packs from ebay, aliexpress. This is a ESK8 Manufacturer, they have common sense. I would hope.

metro batteries are blue - no relation

in the 15 mile Battery THIN they are a generic brand 2.2AH cells rated for 8C. Despite being generic, they are good quality.

Oh damn, thanks for the info. I jumped to conclusions but left myself the possibility that they were non name brand cells.

Metro batteries are blue - relation

@murdomeek You think its a good idea to use metros battery with the elfotys we got? Just worried about the 30/50 amps not being enough, and using 10s5p and do 30-40 amps per motor.

1 Like

also check out these great deals on 190 mm AT Wheels and 155 mm AT Tires:

2 Likes

yeah probably not unfortunately :’( I’ll probably get a custom 30Q pack made with ~100a max discharge. (Not that the eloftys will need it, but too go have in case I change drives in the future)

These batteries seem like a no brainer for the prices.

I still don’t know a lot about DIY but these seem like a good investment for a stiff board.

I bought the “10 mile thin” 10S2P battery. It’s 4.4AH. The BMS is rated for 30A. Pack is tiny, 2lbs. Gonna put it in a small build for my kids. Can’t beat $100. Arrived the next day (I live very close to them)

2 Likes

Does anyone know the MAX amp discharge of the batteries? I know it has 30 amp Continuous.

1 Like

Also anyone know if the metroboard motor pulleys fit on flipsky 6374 or 6384 motors?

Their motor pulleys have a 10mm bore and those motors likely have an 8mm bore.

Some of the FS motors can be had with 10mm shafts, but yeah, you gotta match the shaft to the bore.

Yea i saw option for 8mm and 10mm for the 6384 but the metroboard pulley looks like it doesnt have a keyway slot. (If im wrong let me know, just guessing off of the picture.) If it doesn’t then i would have to get 8mm shaft with torqueboards motor pulleys. Speaking of TB pulleys, does the FS shafts have 2 flats spots to fit the TB pulleys?

The metroboard pulley does not have a key slot.

10A for the LG MH1 cells i think.