After the overwhelming response on the last 6354 / 6374 group buy, I have another 35 6354’s available. They are going to be the same spec as the last buy, but with silicon wires!
So here are the specs again:
190kv sensored 6354
180mm silicone power wire length / 180mm hall sensor wires (120 degree)
4mm bullet connectors
8mm shaft with keyway
0.2mm stator
N42SH curved magnets
NSK ball bearings
30mm AND 44mm mounting holes (works with TB and Enertion mounts)
The silicon wire added $2 per motor so the price is $61 and the shipping as follows:
1-2 Motors: $6.80
4 Motors: $13.45
International: $57 (max 2 motors, message for more than 2)
Message me for PayPal info. Make the title like this to make it easier: 'Forum Name (x#of motors) Ex: JLabs (2x 6354)
If there is interest in the 6374 let me know, there will be limited stock. If we go over the 35, I may be able to get more if they are not sold out. I have 35 reserved currently.
Semi-off topic. For those of you who have changed out your connectors before, do you usually remove them and resolder the new ones on, or do you snip the wire and solder on?