Iām actually selling a my latest buildā¦ dual 6355 190kv board 12s2p. Shred lights and everything youād need for $1100 in the US. Let me know
I love that remote its great.
Super nice with the 2 speed modes that can be adjusted on the fly! 
1 Like
Whaaat @taz ?? Are you kidding me?? Albertoās Dual Beast all day, baby!
Most esk8 companies should be like his. He is in far away Italy but his products appear at your door like they were comming from around the corner. Best fast shippment and product quality Iāve seen in all esk8 world. I will buy anything from Eskating with my eyes close. 
5 Likes
I knew it was a bad idea to spend time in this forumš
I emailed Alberto and changed the battery to 12S5P 
7 Likes
The board is shipped. UPS says it should be here on Wednesday.
10 Likes
The board is here 
It is beautiful and it is freaking hugeā¦
I am all dressed up and ready to go for my first ride
13 Likes
Now I have a few questions.
- WTF have I gotten myself into? Are you guys fucking insane? This was one of the scariest experiences of my life and I have done some weird shit. People are riding these things without a helmet?
- How the hell am I supposed to stop this thing if the brakes fail? I know how to slide a skateboard but this is not happening with 97mm soft wheels. Donāt tell me foot braking because by the time I reduce my speed I will be posing as a hood ornament in some chickās SUV.
- What is that odor that comes off my pants and underwear and how do I get rid of it?
Seriously though it looks like they are really fun once you get used to them. I thought that since I am comfortable on my skateboard a big eskate would be easier. This is not the case.
I will write some more when I get that brown thing off my clothes. I donāt know how it got there since I did not see any mud while comfortably cruising around 
23 Likes
welcome to the club 
2 Likes
lol yes !!
6 Likes
Great postā¦
Made me laugh 
.
Yep, thatās it. But with practice, itās usable. I can foot break from 20mph in about 50 ft. You can always roll out, but that hurts and you look like a twerp .
4 Likes
Thanks guys. It feels really reassuring to know I am not alone in the madness 
.
I have a couple more questions:
- I got speed wobbles above a certain speed, I was relaxed and had my weight forward but it seemed strange to get these on an Evo board when I donāt even get them on my normal skateboard close to these speeds. Unfortunately I have no way of knowing what speed that was since (see question 2)
- My metr.at app fails to connect to the Bluetooth module, I read about incompatibility with some phones running Oreo 8. I have a Samsung Note 8, is it one of the affected phones and if yes is there a solution?
I Just cross your fingers. XD
2 Likes
question 1. tight your truck especially back once u get used to loosen them gradually.
1 Like
I already gave the rear truck a couple of turns . We will see how it feels tomorrow. Any advice on bushings for Calber 50 trucks?
You can dewedge the rear truck and look into different bushings catered to your weight and riding style. Bushings: Riptide!
2 Likes
Venom bushings also have a really good rep
As for wobbles, I always try to get lower to the deck and constantly carve a little (so you move like a snake). These seem to be popular advices to avoid the wobbles.
1 Like
I think its essential to learn this, after not foot breaking in years Iāve spent months using only my foot and feel safe at 30mph knowing I can foot break slow enough to run or roll if I had too, its really helped my confidence at speed no more āomg Iām going to die if my breaks fail right nowā 
3 Likes
So I have made 20km with the board so far. 10km was this morning coming to work with a backpack.
I definitely need to make changes on the bushings on the board since with the stock bushing it turns like a boat. I have ordered riptide 83A, 88A and 93A WFB barrel bushings to play with.
As per Alphamailās advice and my own findings I need to loosen up the front and stiffen the rear.
The range on that thing is insane, after 20km my battery is at 87% 
(granted most of the way to work is downhill)
2 Likes
They have a good rep for being inconsistent in their quality control. Sometimes you buy them and get really good bushings with extreme amounts of rebound. Other times you buy them and get bushings with below average rebound. If you want consistency, just get RipTide KranK bushings.
Getting lower to the ground in itself doesnāt help with preventing speed wobbles. The side-effect of getting lower to the ground is that it forces you to place more weight on your front foot. Thatās the actual bit of advice. Put more weight on the front of the board instead of the back.