I have used LiFePo4 batterys in a battle bot and the transmitter. In my experience they are much stabiles than LiIon and LiPos. Ender charging is much less of a issue. You will still damage the pack but not your house. I have even seen people stab almost dead pack and not have a issue. Im not saying to go poking LiFePo4 pack but you kinda can.
1 Like
I run 40152 LiFePo’s from EVAssemble.com on a couple of boards - they are super-heavy and not sufficiently energy-dense for the weight - you can’t realistically go bigger than 6s1p, though I do have one board thats 9s1p 38120’s. I’m slowly moving away from them.
But I will say that I’ve never had a problem with them - they are simple to setup and bulletproof. I don’t have enough experience with the LiPo’s to say the same.
Im running 7s A123 20AH prismatic cells. Been running great at very high current and no bms. I even ran the cells down to zero a few time never any issues reviving them. no puffing. just a little reduced capacity. after multiple charges per day and alot of riding for 1yr i still get close to 15AH out of the pack.
Only downside is they are bigger, heavier and more expensive than lipo or lion.
But i charge and sleep with peace of mind 
3 Likes
Do you have pictures?
That’s an expensive pack, each cell is like 50+ right?
What type life is that? Any link for spec. And where can buy them?
Yup exactly but i never have to worry
I can’t seem to find any accurate specs for these batteries. Does the manufacturer even have their own website?
How are they working out for you?
What specs are you looking for over and above that which is listed on the page?
I was pretty worried too when I bought them - I had earlier bought a different brand (though they look exactly the same) and was disappointed when they unceremoniously disappeared.
But these are working out well - caveat that I don’t have that many cycles on them - like a lot of people here I enjoy building the boards more than riding them, but they’ve been solid. I won’t hesitate to use them when I build my powerwall 
If it weren’t for the weight and the 3.2v vs 3.7v nominal I’d have stuck with them.
Anywhere that I can get a 12s1p A123 26650 charger? Its difficult to find it for some reason
A Boosted board charger works. All you have to do is search for 43.2v lithium chargers.
Boosted charger is rather expensive, especially when it comes to chipping to the uk
Have you tried searching for a 43.2v lithium power supply? Mean Well supplies are easily adjustable internally with a potentiometer.
I do want the ones that has black plastic case
is that the first generation of the second generation charger? Does it matters?
Yes it matters.
V1 is 43.2V V2 is 50V
Also what bms are you using for your 12s1p battery?
Kinda late to the thread here but my build also uses LiFePO4 batteries - the downside is the board is kind of heavy but I’m not gonna worry about dying in a fire while I’m sleeping lol