The Green Missile | First Build | Planning Stage: Figuring out the electronics

I don’t think that the trampa wheels with the 12mm bearrings will fit the paris Trucks

Ah thanks for the suggestions! I’m completely new so anything to help is appreciated!! I’ll look into the motor! Seems to be the go to around here. Hmm batt will be tough, I know 10s means 10 cell but I don’t remember the P… She’s he use the 18650 cells? I guess that doesn’t matter too much. I’m gonna try to make a split system. I don’t want to cover up my graphic if my girl makes it.

As for enclose I think I have 3d printer access so I’ll probably go that route. I’m familiar with CAD so that’ll be easy :smirk:. Haha and headache is right! But it’s thrilling! Brings me back to when I was researching how to build a PC!!

(I don’t know how to quote) @Lukas huh. Guess it’s a good thing I made the post! I’ll have to look that up. Any recommendations if it doesn’t fit?

Show us yours GF graphics! About the Battery, 10s4p is a good battery, but you can go with 10s3p too, less range, but lighter and less space used!

She’s gotta design it yet :joy: hmmm I’ll have to see about the battery. I live about 6 miles from town so range is something I want a fair bit of

10s4p is 13 or 14 miles of range, but with a Bms you can charge it in 1 and a half hour

Awesome! Sounds perfect! Now I just need to figure out the damn pulleys! I’m good at math but man, that’s a beast for my brain :frowning:

I made some changes! Added a few of the electronics!

Nice, tell us what you did!

Now I’m looking into pulley’s / motor mounts Can’t find much here, I do have access to a mill so I could craft my own, but I still need to figure out the gears!

@trampa I’m wondering if you could offer me some help. I was looking at your motor mount kits but I’m not totally sure if my config would even work with what is offered. I was thinking this one.

http://www.trampaboards.com/trampa-urban-carver-motormount-66-with-tooth-pulley-kits-p-13624.html

But I’m not sure if it would fit the Cal II trucks!! And I don’t think this one would allow/ fit a larger gear for the Hypa hub!

Hi NerdNinja, there is no kit fitting both, caliber II and Hypa hub setups. A caliber truck is designed to work with street wheels. The only dual setup capable design is the carve board fleet. This can take 83,90,125mm and pneumatic wheels. It’s an awesome board! I have a build thread going on. Official Trampa build thread…

Frank

Ok, well I’m 100% set on the board. The next thought in my head is to get the urban Carver infinity trucks. But looking at then it seems they’re designed for boards with angled mounting plates. Witch I could easily build on to my board.

Would that then work with the urban Carver mount? I don’t see why not.

Yes, works. Do yourself a favor and go for the carve board deck. It’s a fucking lush setup mate. Outperforms anything out there. The angled nose section lower your feet in reference to the trucks pivot point. Standing above the pivot point, using wedges, doesn’t give the same feeling.

Frank

Sounds awesome but I think it’ll have to wait for a future build :slightly_smiling_face: the only reason I’m going with custom skateboards is because my girlfriend agreed to draw me a graphic. I don’t think I could do that as easily with a carve board!

You can. Just print it on foil and stick it on. Some people have done lush stuff.

Frank

have a look at lipo 5 x 2s 5000mah 65c with a bestech bms theres more work wiring and reading heres the link

That might actually be cheaper… I’ll look into it!

@hornet90 Any reason to do this over a diy 10s4p with li-lion cells?

im finding constand power is a lot better less sag you should get 13 to 14 miles out of that set up im just waiting on my bms i should be testing within a week or so

Huh, well I think I’m gonna stick to the 18650 cells.

Check this out! It’s short but… yeah. Oh and this!

i have the (36V 8AH) and i had 2 x3s 5000mha 65c lipo im going back to lipo,

you know its up to u but do more reading on it there are people on esk8 that would agree and disagree but u cant beat the real feel ive lost a lot of money on batterys im lipo all the way now,

let me know how u get on, good luck with the build

1 Like

Can someone tell me if these will work together? I’m only not sure about the belt length…

http://shop.sdp-si.com/catalog/product/?id=A_6A35M060NF1008 http://shop.sdp-si.com/catalog/product/?id=A_6A35M016DF1006 http://shop.sdp-si.com/catalog/product/?id=A_6T35MF126100

I guess I should also find out if the large pulley will work with @Maxid 's hub design…