Are you going to do a version like that for Matrix II?? That looks soo sexy!
1 Like
@Sender Of course … it’s just a different hole for a hanger and a different length of the crossbar
2 Likes
Yup, literally why I was asking!! Thanks guys
1 Like
You need to make a direct drive 
I like your belt drive kit for my Urban Carver… But i would love a direct drive from you for my Trampa MTB
1 Like
@routevoom Sorry for my late reply.
Prices: V6.2 - Double Motor mounts - 150 Euro V7.0 - Double Motor mounts, version without crossbar - 100 Euro V7.1 - Double Motor mounts, version with a one crossbar - 130 Euro V7.2 - Double Motor mounts, version with a one crossbar + idlers - 150 Euro
A set of pulleys and belts (20mm wide) is an additional 130 Euro
The cost of shipping to Canada is 35 Euro. Sent by a post office (air shipping)
Pictures of individual versions
V6.2 - it is a dual motor mounts with 4 crossbars and idlers.
The V6.2 version has idlers made of 7075 aluminum ). Photos of version 6.2 will be available tomorrow.
V7.0 - Double Motor mounts, version without crossbar
V7.1 - Double Motor mounts, version with a one crossbar
V7.2 - Double Motor mounts, version with a one crossbar + idlers
Version V7.2 will be available at the end of April
23 Likes
Nice, cool stuff, this wanna make me upgrade my mounts…
3 Likes
I see a spur gear drive for evolve trucks in the picture thread, is that one in another thread? Or do you own a webshop?
Thank you Tom!
Will you have a crossbar on V7.2 that will fit the Vertigo trucks on a Trampa MTB? Or you intend this model for smaller Trampa boards, like Urban, etc… ?!
Same question again Can I use the V7.1 with a crossbar that will fit the Vertigo trucks on a Trampa MTB?
It is 66 teeth on the pulley? What about the motor pulley?
I am debating between Treads tyres from Trampa or the Slick Cuts from Innova. Would you recommend the Innova Slick Cut ones if I plan to do mainly road and only some packed dirt path or nice grass riding. I saw you in a video using them before… What do you say?
I do not have an online store yet. Now I make small series of motor mounts and belt drive for individual orders. Gear drive for evolve trucks is still an early proototype. I have not yet added a thread on this topic. I will create a thread when I make my first tests.
@routevoom I make crossbars for the required length, so I can do V7.1 fixing for different trucks (MBS, Trampa, etc) I already have the first orders for version 7.2 for Trampa ATB, so you’ll be able to see photos in mid-April.
It offers 2 sizes of pulleys, 72t and 60t, 60t only for Superstar Hubs. For the motors I have 15t pulleys
I use Polish ZABI tires, they are similar to Innova Slick Cuts, but the rubber mixture may be different. https://www.zabi.pl/en/kolka-oferta/311//
If you drive in the city, the Innova Slick Cuts tire will be OK, but on wet grass it can be too slippery
@Eboosted Version 7.2 is not yet available.
1 Like
Thank you Tom!
@routevoom The V6.2 version with idlers made of 7075 aluminum
The weight of the dual motor mounts included with the bolts is about 800g
4 Likes
For mountain boards can you price me for 4wd mountain board Setup with 4wd 4 motors on 8” wheels
Are talking about the price for the mounts, or the whole build?
Price for the mounts, to have a set you have to pay extra 100-130 Euro (the price depends on the size and width of the pulleys)