Email sent thank you!
So sick! 
love your videos bro keep Up the great work!
1 Like
@Nowind How wide is the total gearbox? Just wondering how big of motors you could put on the mini trucks with this kit. Amazing build by the way.
Hey
Upgradet all parts with more aluminium and some colour :
I´m actually use the Mini Drive only with the regular MTB Hanger… in this config you get an support bearing inside the Wheelspur and are able to fit 6384 Motors with easy… more possible in length but not in diameter… no 80mm with MINI DRIVE
7 Likes
What is the difference between the mini and the standard? Also, where does the bearing on the spur gear slide onto? I don’t see the area on the trucks for it.
Here i compared the different Drives …
Support Bearing sits on Axle not on Hanger 
Feel free to ask
So the wheel still fits with the added width of an extra bearing? What is the pitch of the gears?
Do you really think it could not fit 
Mod-2
Is that 2mm pitch or are you referring to this gear company? https://www.technobotsonline.com/mod-2-steel-spur-gears.html
I can only see one website selling mod 2 gears which is the one I posted above
I will figure is out as they supply tooth count and diameter which is enough. Thanks!
Dont know what you want… answered your question already… isnt it
There is a big fat spacer in between the wheel and the rest of the truck. Replace that spacer with a bearing and a washer, problem solved. The rest depends on the mounting system and how far you are able to move it towards the center of the truck.
Ok, that makes a lot of sense. That is what I needed.
Already seeing that the asking price of this direct drive is more than fair by the way. Components wise/developing my own drive, I would already spend around 150 Euro on a solution that I would consider n00b level. Take into account the hours Jens spent developing and refining such a drive, along with needing all the equipment to manufacture at a high precision.
What I can come up with would not be as good as this drive, while spending a good amount of money and time. For science though.
1 Like
As a follow up…I bought a Jens drive.
Loctite 243 enough, or should I go with 2701 (specifically for the hub screws)?
Hey i missed this …
I take for everything this : http://www.maedler.de/product/1643/1624/569/loctite-243-mittelfeste-schraubensicherung
Except for glueing Motorspurs to Motorshaft, i take this instead : http://www.maedler.de/product/1643/1624/574/loctite-603-oeltolerantes-fuegeprodukt
Hope that helps
Cheers Jens
1 Like
sorry to hear about your accident Jens, and here I was emailing you for parts and stuff, get well soon man!
1 Like
Thanks Dude
No Problem
What i have in stock i can ship no problem
In love 
1 Like