hit me up fambolla. give me the clamp and mount
Not sure what the standard for 63xx motors are. The 38 is for the 50xx Ollin motor and the 30 is for a few of the generic (NTM prop 50) motors.
I’d do it in a heart beat 
can you make a 32mm for sk3?
I made 3 mounts for @sl33py that fit SK3 63mm (149kv). The hole pattern was 32mm square center to center.
If he doesnt want them I can sell you one or I can make another one but it will be another week- week and a half to have it made. I’m going to give him a few more days before I offer them up for anyone to buy.
1 Like
I just sold out of the 30mm arm. I just have the Ollin hole pattern which I think just fits his motors but not 100 percent sure, it may fit others. It is 38 mm diva center to center.
I still have about 6 left.
Is your mount compatible with diyelectricskateboard clamps. I bought from him without realizing the spacing for my ollin motor was not the same.
I dont believe so, I designed them to just match my clamp. I have only seen his mount in pictures and have no idea of his specs.
how many do you need
I only have a single motor
Can you return it to him. I can ship one out to you today.
@korryh that’s tempting. Idk his return policy. I was going to attempt to drill my own holes. I have access to a better shop next week. If it doesn’t go so well I’ll most likely definitely be ordering from you.
still have the mounts?
I have a few left that fit Ollin 50xx motors and one wit 30mm square motor hole pattern. How many do you need.
I have a few mounts left and will be making another order if anyone is interested. I have been doing quite a few mounts for 63mm Tacon and SK3s in aluminum arms and stainless arms. Let me know if you need something different and I can see I can make it. Just did a pair of arms out of .25" stainless per someones specs.
4 Likes
I might be interested in two mounts for 63mm motors. I got @torqueboards v4 mount, but can’t reverse mount it since the angle I need it in is somewhere where the screw holes aren’t present. Should I PM you the specifics, or have you reverse mounted before with 70~mm center distance?
They can be reversed. I made these for Sl33py and their CTC is 60.45mm to 73.2mm. The all aluminum will be 45.00 per mount and the aluminum clamp with .25"stainless arm will be 60.00. Just let me know the motor mounting hole pattern. Correction - the all aluminum for 50xx motor is 45.00 and the all aluminum 63xx is 50.00 both with free shipping.
1 Like
That’s pretty much what I need! I just want to make sure that it will get the angles I need. I think it will be okay since your screw slots on the mounting plate are longer than TB’s. I’ll confirm c distance tonight and get back to you.
To clarify you mean it’s $60 for clamp + plate?
Yes, for the clamp and stainless arm is 60.00.