If you dont need aluminum cases I have 2 that are done…
Will you offer any type of repairs if they fail? Whats the price
These are with nrf. I would add all pin headers, remove my 2.4 ghz receiver and ship them in this case if wanted 220$ for both. If they fail wich I doubt I’ll fix them free of charge.
2 Likes
Hello everyone. Do you know how is the VESC 6 compare with the ESC of Meepo Boards?
1 Like
Better in every aspect?
4 Likes
Thank you koralle. would you share the set up of brake of vesc to me, because i found the brake of me was not good.
1 Like
this is kinda off topic but here you go I think this information is still valid for vesc 6:
If you want proper brakes, I suspect you will need a better battery too. Don’t know if the stock meepo battery can take much charging current…
2 Likes
OK. thanks Koralle. I will change a better battery, then follow the information that you share to set up it.
1 Like
@bimmmer i’ve pm-ed you.
@others i did ask stewwi in pm, never got a reply or heard anything. So my own thread makes sense
Hi, we sale vesc6 now, are you still find esc6?
Link, or it didn‘t happen…
Link please
1 Like
Hi, our website linking is www.flipsky.net, but we not official sold in our website. the ESC6 can order now but esc6 with case maybe available after 20 May
2 Likes
Cool cool. How much for 1pcs Vesc 6 based version?
2 Likes
This is just a plastic model. The water proof aluminum box is really sold later. We also added a fireproof switch to esc6. contact me if you want order please.
1 Like
What QC-testing is done? Is the NRF included with the PCB antenna? How does Warranty work? How do you support Ben Vedder in relation to sales?
2 Likes
I just received the pics of the aluminum case it’ll be housed in, and I’m a bit confused as to its size. This VESC on its own looks smaller than any of the other HW 6 VESC, but the case is like 100mm x 90mm or similar.
Now one thing I am quite curious about is will you be making a dual VESC 6, or at least a dual case for this VESC? I plan on running 2 VESC’s, but if I was to go with this unit, it seems odd that I would have to have two power on/off switches… Also, is there a way to mount the buttons on the enclosure so I don’t have to open the enclosure to turn the system on? Or could I simply just leave them in the ‘on’ position, and add a anti-spark on/off switch further up towards the battery like a normal setup, and when that is turned on or off, the VESC’s, being left in the ‘on’ setting, would turn on or off automatically, when the other switch is turned on or off?
2 Likes