Talking about this , TB motor pulley is different and doesn’t have the indentation it’s big and the screws they provide are long so it will end up hitting the wheel if it’s more than 90mm and changing the screws won’t work
@Exiledd_Top So I should buy: 2x this: collections/electric-skateboard-motor-mounts/products/single-bolt-on-motor-mount-set-only-black And 2x this:?
Will this belt fit these components:? collections/pulley-timing-belts/products/265mm-htd5-12mm-belt
Oh, and how about the wheel pulley?
Apparently most motors don’t mind the rain and will fuction fine after being wet it’s more debris you have to look out for! As far as the canbus lead you can run it that way or just split the ppm and snip one of the wires. No need to glue the battery in to the enclose you could add some foam to dampen the vibrations. Your want a y piece xt90 connector or xt60 if your vesc’s have that or you can make one. I would only buy the all terrain wheels if you plan on going off road alot otherwise they wear down anyway “on road” and start to look like you standard road wheels.
@WARMAN So what’s the PPM? And which wire do I have to snip? The y 2x vesc to battery is in the list up there. That’s true, I won’t always be ridding this off road but I really want big wheels! Maybe the Abec 11 97mm that @Exiledd_Top posted before. (Thanks for the feedback😋!)
That should be all the info you need on it,I run the canbus at the minute,the traction control is nice especially in the wet but I will be switching to splitting the reciever signal soon simply because the connection from my canbus lead is now a little suspect and I have a splitter lying around!
Thank you! That thread was really interesting. So would this one work? (All I have to do is cut one of the two middle red wires?) https://www.hobbygo.com.au/receiver-transmitter/233-y-cable-0702105702215.html
The belt and tb mounts are find as long as there caliber 2 trucks your set
Could be a nice addition😉
Ok, lets start over: I want a dual 6374 setup so I need 218mm trucks (from TB), I then need my motor mount which has to be compatible with the 218mm trucks: (I think these are?) 2x collections/electric-skateboard-motor-mounts/products/single-bolt-on-motor-mount-set-only-black Will these fit these wheels? http://www.ollinboardcompany.com/product/abec-11-flywheels-97mm-75a Then need pulleys: 2x these: will these fit the wheels above? products/36t-abec-pulley-combo-kit
And you said 2x these: (just wont use TB motor pulley because it doesn’t fit?)
Is not that it won’t fit the motor it just won’t fit anything past 90 mm wheels so that is why you go for ollin motor pulley
I have to call BS on this. I have that exact mount and pulley kit and it fits 97mm wheels. The only reason I can see why the pulley wouldn’t fit is if you’re running really short belts like 240mm in length or something.
1 Like
@pennyboard So you mean all the parts I said before just without the ollins pulley will work and fit perfectly?
@pennyboard Even this belt will work with the setup above? collections/pulley-timing-belts/products/265mm-htd5-12mm-belt
Let me check what size my belts are when I get home and then I’ll be able to let you know for sure.
Yeah because you know, I’m the one asking so got no clue.
Good luck getting those 97mm 75a. Those are pretty much the least common wheels you can find. Sold out most places.
We’ll see about that!