Which scotch? I love a good Balvenie single malt - their entire line is delicious 12y doublewood and 21y portwood being my two favorites.
Hawaii huh? Which island? It’s odd to me for someone to go all the way to Hawaii with something like Bali in your back yard effectively (like us going to mexico). Cheap and easy. Can’t imagine Hawaii is cheap…
Hope you have some great time off and a chance to unwind! If you are on the big island (Kona) and want to do some diving shoot me a PM and i’ll try to connect you with my old dive instructor who moved there!
Is it possibly to get these motors to start from a standstill? I have tweaked the sensor mode settings in BLDC tool under the sensor(less) tab but the motors only go under sensorless mode and I have to push to start up.
130kv is really low, so you’d have to be running 12s- and even then you’d probably have to gear it up more than normal to get a decent top speed.
it’s sensored, and 6374 vs 6355, but I’d just buy the turnigy 190kv 6374 for $80 and call it a day if I wanted a bigger motor-
the one thing you gotta take into consideration though is that for its size, the enertion motor is pretty strong; it’s just like the tacon motors that a lot of people love.
Alien rates it for 10S though, so 12S would probably work but who knows for how long. Why would anyone want a kv that low? Are they climbing trees or pulling other skaters out of the mud pits?
How do you make these claims? It’s as if you expect everyone to not be aware and take your word for it and I guess most do
“use the highest quality motors to maximise performance and deliver pavement cracking torque. Enertion Boards is now offering the R-SPEC EBOARD MOTOR - Built from the ground up to be the the benchmark motor for building electric skateboards. Choose Enertion motors for your electric skateboard because the alternatives from the hobby shop are not designed with quality bearings suitable for carrying human size loads, they will often use leads that are inflexible & have tiny 4mm connectors that just can’t handle the high amps that can often be pulled into the motor when climbing steep hills. The Enertion R-SPEC motor has large open ports to maximise air-flow and minimize weight. The R-SPEC motors offer minimal drag when unpowered allowing the smoothest free ride out of any motor on the market.”
What makes it highest quality? Any manufacturer making such a claim will say why.
“built from the ground up” huh?
Hobby shop bearings and your bearings don’t take human sized loads just the motor’s and the load they can take is very much so determined by the size alone.
Typically multistrand wire that’s used in a motor and then extended into the motor leads is the least desirable.
4mm connectors CAN handle the amps.
Less drag than any motor on the market?
Is this an informational site or a promotional site. It could be both if you gave real information but if you don’t those of us who know the littlest bit have to speak up.
i’m sticking with 5.5mm bullets. I like them and they don’t give me any problems. Spreading the prongs with a tiny screwdriver is the only thing you ever need to do when they’re loose, if they’re loose, and in my experience, it isn’t that often. They make a lot of sense when using 10awg wire over a coupled connector like hte XT-60s and 90s whe you need wire routing flexibility but still want the modularity required for swapping parts without a soldering iron. 4mm bullets make more sense on 12awg wire, but i don’t use 12awg wire, unless it comes on the motor and is an adequate superworm type silicone and high strand count wire. ESPECIALLY on anything under 10S.
if you’re motor wires are unplugging or working thier way out, there are other things that need to be checked before you jump in and spread your prongs for the quick fix. Maybe theres just too much tension on your motor wires. Maybe you should have used heat shrink over the connection.
if you have bettery cables unplugging in your box, well… same thing. heatshrink or tape. And why the hell is there that much tension on anything INSIDE the box?
I’m struggling here to think of a situation where bullets are the actual cause of the problem and not something else.