E-MTB Drive Gear with Spur Gears "Directdrive"

[Nowind]

Thanks David.

So yeah its the Economic (-; But there will only be this version from now on ! Why? Because they are no really downsides! No need to spend more time on the CNC … no need to spend more money for this time on CNC.

Know what i mean? Why make parts more expensive then nessassary? Its no compromise in function! Only in design IMO for fans of milled Aluminium maybe a downside (-; These guys can get the Aluminium Version of course on request.

Its also possible to use CF on request, but best bang for the buck will this stainless parts… also the non thermal feature of CF is a downside for Motormounts IMO.

@DavidC

The price is totally fair IMO. I just wondered, why is it a little more expensive for non EU than EU? Because of VAT maybe?

Yes the reason is VAT. Thats why its more expensive for EU customers.

@DavidC

The economic version is heavier maybe?

Its slightly heavier, but only about 90gramms…

Best Greetz

[notger]

And waht do you Think about 7075 3mm sheets instead of the Stainless Steel. Must be strong enough too ?!? but probbly just a few gramms to save there.

Beautiful Design again Jenso !!

greets

Gernot

[DavidC]

I totally agree with you. I think my next mountainboard will use these and VESC6 (maybe).

I think you’re right to use the VERTIGO hanger and not the ULTIMATE hanger for this. The 9.525 mm bearings don’t fit perfectly the 9.525 mm axles of the ULTIMATE. There’s some kind of little gap, that doesn’t exist with 12 mm bearings/axles. Weird…

[Nowind]

@notger

And waht do you Think about 7075 3mm sheets instead of the Stainless Steel. Must be strong enough too ?!? but probbly just a few gramms to save there.

Beautiful Design again Jenso !!

greets

Gernot

Thank you Gernot.

I dont think that it is strong enough to go with 3mm 7075… Dont forget that you will have sometimes ground contacts and that inside gears are working which needs proper mesh… imo 3mm Aluminium is to flexy.

@DavidC

I totally agree with you. I think my next mountainboard will use these and VESC6 (maybe).

I think you’re right to use the VERTIGO hanger and not the ULTIMATE hanger for this. The 9.525 mm bearings don’t fit the 9.535 mm axles of the ULTIMATE. There’s some kind of little gap, that doesn’t exist with 12 mm bearings/axles. Weird…

I have made not the best expierence with the Ultimate Trucks in Electric MTB´s, one bent and one broke. Dont use them anymore. Only Vertigo Trucks.

[DavidC]

@Nowind

I have made not the best expierence with the Ultimate Trucks in Electric MTB´s,one bent and one broke.

I remember that these problems were with ultimate atb SKATE trucks, am I wrong?

I have two e-mtbds with ultimate atb SPRING trucks and none of them failed this way (I weigh 85 kg). But I have to admit I’m little less brutal than you with them.

[Nowind]

Unfortunaly i damaged both kind… SKATE and SPRING

This are the springs:

Its like Trampa says, Ultimate are more for the KLB people or/and lightweight ones (-;

[Okami]

So the axle for these does not go all the way through?

I saw a ‘‘skate’’ axle and for it ther axle was one long piece… for these it looks like there are 2 seperate axles for each wheel / side… is this correct?

[Nowind]

They are pressed in from two sides, so yes 2.

[Nowind]

Some more Parts which are used for the Eco Drive :

Combination of Steel and POM :

Axial Sealment of the gearbox :

Have a nice day (-;

[stylr]

I always get slightly aroused when I see pictures of your work

I would love to get these motor mounts at some point, but no funds at the moment

I know this is a bit off topic, but would love to see some pictures of your workshop and your machines

[Nowind]

Thank you @stylr (-:

Will take some pictures of the shop… dont except any big

[Nowind]

Shrinked the Trucks and Mounts (-;

In front the Urban/Street Carver Trucks with smaller Gearbox…

Small enough to ride on the pure Hub

Ready for upcoming 125mm Urethan Wheels from @Trampa Fits to 7 and 8 Inch pneumatics on Superstar Hubs Made for Street Carver / Urban Carver Trucks Fits also on MTB Trucks

Actually doing Beta Tests… will let you know how it goes …

Jenso

[Duffman]

Cute! Ready for a 4WD urban drifter…

[Nowind]

Already tested

Hard as hell !!! Thought it will be easier with 4WD but its really really HARD

Swapped to 8INCH pneumatics …

Also tested Overdrive on the backtruck with 20% more RPM… but dont get much better… i think you just need alot more speed for 4WD drifting, because higher grip at all !?!

[Michaelinvegas]

Dope

Sick AF

[Michaelinvegas]

What’s Esc’s are you using again @Nowind?

[Nowind]

This are the Hobbywing Max6 ones… 8s-160A… geared to 54kmh

[Michaelinvegas]

Dang … scary

Me likey

[Duffman]

We have to meet soon. I want to ride this thing before the drift tires are ground down to the rims…

[Nowind]

Got some more Raw Material for Drift Wheels… but yes we have to met soon!!!