Ill give it a shot, not exactly sure what the ID of the tire is thats why I thought I might have to share it, but we will see. Could be awesome, could be crap 
.
1 Like
thank you for your try.
1 Like
Do you have the Inside Diameter (ID) of the tires?
hrmmmm…thinking
OK, so the ID of the tire is 70mm, the OD of the wheel is 76mm (at least mine are). So I may need to do some shaving on one side or the other. @psychotiller, you have any suggestions on method?
Make a wooden jig that clamps the tire. Find a hole saw thats the proper ID. Center it up and cut that hole.
1 Like
That what I was thinking, just wanted to make sure I wasn’t being stupid :). I’ve never cut thane before.
respiration brotha!
Will do, have some fiberglass gear in the shop I’ll ‘borrow’ over the weekend and no one notices
i guess we are talking about the different diameter, better confirm here again. the entire wheel size is 150mm diameter, tire width is of 50mm, the inner diameter is 70mm. as for the outside diameter I don’t know what you are refering to. better wait untill you got them then you make a fit adjustment.
The hubs I am working with have an OD (OUtside Diameter) of 76mm. The wheels you are selling have and ID (Inside Diameter) of 7CM, or 70MM. So there is a 6mm difference that will have to be resolved, assuming all of the figures are correct.
Ill wait until they arrive to make any structural changes.
i get your meaning now. we use 82diameter hub for this tire. I think the hub OD fit range would be 80MM-85MM.
1 Like
You should be able to lever those on with tire irons dude, 70a and only 6mm should be cool looking forward to seeing these
3 Likes
looking like the wheels may be too small now, might have to print a sleeve or something.
ｙｏｕ ｂｅｔｔｅｒ ｔｏ ｇｅｔ ｈｕｂｓ ａｌｓｏ ｆｒｏｍ ｕｓ ｉｎｃａｓｅ ｙｏｕ ｎｅｅｄ ｉｔ ｆｏｒ ｍａｋｉｎｇ ｙｏｕ ｏｗｎ ｈｕｂｓ， ｊｕｓｔ ｆｏｒ ｓｉｚｅ ａｎｄ ｍｅｃｈａｎｉｃ ｃｈｅｃｋｉｎｇ， ａｆｔｅｒａｌｌ ｉｔ ｎｅｅｄ ａ ｗｈｅｅｌ ｐｕｌｌｅｙ， ｈｏｗ ｗｉｌｌ ｙｏｕ ｔａｋｅ ｃａｒｅ ｔｈｅ ｐｕｌｌｅｙ ｌｅｔ ｍｅ ｋｎｏｗ ｙｏｕｒ ｃｏｎｃｅｒｎ ｂｙ ｅｍａｉｌ， ｓｏ Ｉ ｃａｎ ａｒｒａｎｇｅ ｔｈｅｍ ｔｏｇｅｔｈｅｒ ｆｏｒ ｙｏｕ ｂｅｆｏｒｅ ｓｈｉｐ ｔｈｅｍ ｏｕｔ．
just go ahead and ship them. I’ve worked out the pulleys. I’m not really interested in using any hubs but the ones I have.
ｎｏ ｐｒｏｂｌｅｍ．
shipped today, see you email updates.
1 Like
we got all these motor mount in stock, anybody like it can send me messages or email me: [email protected] or check more kits and parts on our site: http://www.diyeboard.com/